JVC GR-DVX90 specifications EN85, Auto Shut Off

INDEX Docking Station EN85

57

6

1

2

3!

4

8 9

0

1PC Connector [DIGITAL STILL] ............
pg. 58

2J Terminal/Edit Connector

[JLIP (Joint Level Interface Protocol)

(EDIT)] ................................................
pg. 71

•Connect to a JLIP-compatible camcorder or VCR to control it from the computer using the provided Software.

NOTE:

Make sure that the camcorder is turned on while connecting the camcorder to a PC using the Docking Station’s JLIP connector. If the camcorder is turned off (because the POWER Switch is set to “OFF” or due to Auto Shut Off* etc.) while the JLIP programme software is used, it will be impossible to control the connected devices from the computer. In such a case, first try turning the camcorder on again, or unplug the JLIP connec- tion cable from the Docking Station’s JLIP connector. Then, initialise or run the software again.

*Auto Shut Off:

If 5 minutes elapse in the Record-Standby mode or in the Pause mode, the camcorder’s power

shuts off automatically to conserve energy.

•Connect the editing cable when performing Random Assemble Editing .........
pg. 70 – 75

3PRINTER Connector

Connect to the optional printer equipped with a PRINT DATA connector. Refer to the separate

“FOR OWNERS OF AN OPTIONAL PRINTER” instruction sheet.

4External Stereo Microphone Input

Connector [MIC]	pg. 76
5 Stud	pg. 56
6 Screw	pg. 56

7Multi Connector

The Docking Station can be connected with this camcorder through this connector. Never touch it with your hand or hit it with a hard object; if the pins are damaged, the connectors will become unusable due to contact failure.

8S-Video Input/Output Connector

[S]
pg. 56, 71

9Video Input/Output Connector

[VIDEO]
pg. 56, 71

0Audio Input/Output Connectors

[AUDIO L/R]	pg. 56,	71
! Screw Knob	pg.	56
To attach the camcorder, tighten this clockwise.