18 EN | RECORDING Basic Recording For Video |
START/STOP Button
POWER Switch
POWER Lamp
Lock Button
NOTE:
You should already have performed the procedures listed below. If not, do so before continuing.
●Power ( pg. 8)
●Grip Adjustment ( pg. 10)
●Viewfinder Adjustment ( pg. 10)
●Load A Cassette ( pg. 12)
●Recording Mode Setting ( pg. 13)
Display
2 5
MODE Dial
Tape remaining time indicator (Approximate)
1 Set the MODE Dial to “VIDEO” and set the POWER
Switch to “ ” while pressing down the Lock Button located on the switch.
Shooting while using the viewfinder: Make sure the LCD monitor is closed and locked. Pull out the viewfinder fully.
•Be sure to pull out the viewfinder until you hear a click, otherwise it may be pushed back in during use.
Shooting while using the LCD monitor: Make sure the viewfinder is pushed back in. Open the LCD monitor fully.
min 
90 min 
89 min 
3 min
(Now calculating)
0min
1 min
2 min
(Blinking) (Blinking) (Blinking)
Tally lamp (lights while recording is in progress)
•The POWER lamp lights and the camcorder enters the
Press START/STOP. “ | ” appears while recording is |
2 in progress. |
|
To Stop Recording . . .
.... press START/STOP. The camcorder
BR I GHT
180° 90°
To Adjust The Brightness Of The Display
.... rotate the MENU wheel until the bright level indicator
MENU Wheel | on the display moves and the appropriate brightness is | |||
reached. | ||||
|
|
| ||
|
|
| • It is also possible to adjust the brightness of the viewfinder. | |
|
|
|
| |