62 EN
POWER Switch
O | Lock Button |
DL | |
D |
|
U |
|
A |
|
DUBBING
Dubbing To A VCR
1 Following the illustration, connect the camcorder and the VCR. Also refer to pg. 58 and 59.
2 Set the camcorder’s POWER Switch to “
” while pressing down the Lock Button located on the switch, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR.
3 Engage the VCR’s AUX and
4 Engage the camcorder’s Play mode to find a spot just before the
5 Press 4/6on the camcorder and engage the VCR’s Record mode.
Red to
AUDIO 
R OUT
White to
AUDIO
L OUT
White to
AUDIO L IN
Red to
AUDIO R IN
Yellow to
VIDEO
OUT*
Audio/ Video cable [RCA plug to RCA plug] (optional)
Yellow to
VIDEO IN*
To
S-VIDEO
OUT
To
IN
6 Engage the VCR’s
7 Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder when finished.
NOTES:
●The
•
•Audio/Video cable (RCA plug to RCA plug): YTU94147A
Consult the JVC Service Center described on the sheet included in the package for details on their availability. Make sure to connect the ends with a core filter to the camcorder. The core filter reduces interference.
● You can use the AV OUT connector on the camcorder |
for connection. |
● You can use Playback Zoom ( pg. 68) or Playback |
Special Effects ( pg. 69) in step 5. |
● Before you start dubbing, make sure that the indications |
do not appear on the connected TV. If they do, they are |
VCR
TV |
*Connect when an
being recorded onto the new tape. |
To choose whether or not the following displays appear on the connected TV . . .
•Date/Time
.... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the
Menu Screen ( pg. 43). •Time Code
.... set “TIME CODE” to “ON” or “OFF” in the Menu
Screen ( pg. 43).
•Playback Sound Mode, Tape Speed And Tape Running Displays
.... set “ON SCREEN” to “LCD” or “SIMPLE” in the Menu
Screen ( pg. 43). Or, press DISPLAY on the remote control.