JVC GR-DVM90 specifications EN81, Was registered

		EN81
SYMPTOM	POSSIBLE CAUSES	CORRECTIVE ACTION
17. Program AE with special	17. • The Operation Switch is set to	17. • Set the Operation Switch to
effects and Fade/Wipe Effects	“ ”.	“ ” ( pg. 36, 38).
do not work.
18. The Black & White Fader	18. • The Sepia or Monotone mode	18. • Turn off Sepia and Monotone
does not work.	is activated.	( pg. 36, 38).
19. The Dissolve function does	19. • The Sepia, Monotone or Slow	19. • Turn off Sepia, Monotone or
not work.	Shutter mode of Program AE	Slow Shutter before adding
	with special effects is activated.	Dissolve to a scene transition
	• “WIDE MODE” is set to	( pg. 36, 38).
	“SQUEEZE” or “PS-WIDE” in	• Set “WIDE MODE” to
	the Menu Screen.	“CINEMA” or “OFF” mode
	• The previously selected mode	( pg. 30).
	of Program AE with special	• Make sure you have selected
	effects was changed after the	the mode of Program AE with
	last selected scene for editing	special effects you want before
	was registered.	starting editing ( pg. 36, 38).
20. The Picture Wipe and Dissolve	20. • The last selected editing scene	20. • Select Picture Wipe or Dissolve
functions do not work.	is ending.	before beginning recording. The
	• At the end of the last selected	effects are then automatically
	scene for editing, the POWER	activated ( pg. 36).
	Switch was set to “OFF”.	• Do not turn off the camcorder’s
	• The power is off.	power after setting Edit-In and
		Edit-Out points, as they will all
		be erased ( pg. 36).
		• The camcorder automatically
		shuts off after 5 minutes have
		elapsed in the Record-Standby
		mode. Make sure you
		continue operations within 5
		minutes after engaging Record-
		Standby mode ( pg. 36).
21. The picture wipe function	21. • The Slow Shutter mode is	21. • Disengage the Slow Shutter
does not work.	activated.	mode or set “WIDE MODE”
	• “WIDE MODE” is not set to	to “OFF” before preparing to
	“OFF”.	use the Picture Wipe
		( pg. 30, 36, 38).
22. Scene transition does not go	22. • When using “Picture Wipe/	22.
as expected.	Dissolve” ( pg. 36), there is a
	delay of a fraction of a second
	between the previous record
	stop-point and the Dissolve
	start-point. This is normal, but	————
	this slight delay becomes
	especially noticeable when
	shooting fast-moving subject
	or during rapid panning.
23. The Video Echo mode does	23. • The Picture Wipe or	23. • Set “WIDE MODE” to
not work.	Dissolve functions are in use.	“CINEMA” or “OFF” mode
	• “WIDE MODE” is set to	( pg. 30).
	“SQUEEZE” or “PS-WIDE” in	• Do not try to use the Video
	the Menu Screen.	Echo mode during a Fade-In
	• A Fade-In or Fade-Out is in	or Fade-Out ( pg. 36, 38).
	progress.

CONTINUED ON NEXT PAGE