JVC GR-DVM90 Demonstration will resume, After viewing demo, set to OFF, High magnification

Page 30

30 EN RECORDING Advanced Features For Video And D.S.C. (cont.)

Menu Screen Explanations (cont.)

CAMERA MENU

MANUAL MENU

DEMO.

ON

Demonstrates certain functions such as Program AE with special effects, etc.,

MODE

 

and can be used to confirm how these functions operate. When “DEMO.

 

 

MODE” is set to “ON” and the Menu Screen is closed, demonstration starts.

 

 

Performing any operation during the demonstration stops the demonstration

 

 

temporarily. If no operation is performed for more than 1 minute after that,

 

 

the demonstration will resume.

 

 

NOTES:

 

 

If a tape is in the camcorder, the demonstration cannot be turned on.

 

 

“DEMO. MODE” remains “ON” even if the camcorder power is turned off.

 

 

If “DEMO. MODE” remains “ON”, some functions will not be available.

 

 

After viewing demo, set to “OFF”.

 

 

 

 

OFF

Automatic demonstration will not take place.

DIS

OFF

To compensate for unstable images caused by camera-shake, particularly at

 

 

high magnification.

NOTES:

Accurate stabilization may not be possible if hand shake is excessive, or

under the following conditions:

When shooting subjects with vertical or horizontal stripes.

ON

•When shooting dark or dim subjects.

When shooting subjects with excessive backlighting.

When shooting scenes with movement in various directions.

When shooting scenes with low-contrast backgrounds.

Switch off this mode when recording with the camcorder on a tripod.

The “ ” indicator blinks or goes out if the Stabilizer cannot be used.

SELF-

Refer to “Self-Timer” ( pg. 34).

 

 

 

TIMER

 

 

 

 

 

 

5S

OFF

Refer to “5-Second Recording” ( pg. 35).

 

 

 

 

5S

 

 

 

 

 

 

 

ANIM.

Allows you to record a few frames only. By using an inanimate object and

 

 

 

 

changing its position between shots, you can record the subject as though it is

 

 

 

moving ( pg. 35).

 

 

 

 

 

 

 

 

TELE

OFF

Usually the distance to a subject where the lens is in focus depends on the zoom

MACRO

 

magnification. Unless there is a distance more than 1m (3.3 ft.) to the subject, the

 

 

 

lens is out of focus at the maximum telephoto setting. When set to “ON”, you

 

 

 

ON

can shoot a subject as large as possible at a distance of approx. 60 cm (2 ft.).

 

 

 

 

• Depending on the zoom position, the lens may go out of focus.

 

 

 

 

OFF

Records with no change in the screen ratio. For playback on a TV with a

 

WIDE

 

normal screen ratio.

 

 

 

MODE

 

CINEMA

Inserts black bands at the top and bottom of the screen. During playback on

 

 

 

 

 

wide-screen TVs, the black bands at the top and bottom of the screen are cut

 

 

 

and the screen ratio becomes 16:9.

appears. When using this mode, refer

 

 

 

to your wide-screen TV’s instruction manual. During playback/recording on

 

 

 

 

4:3 TVs/LCD monitor/viewfinder, black bands are inserted at the top and

 

 

 

 

bottom of the screen and the image appears like a letterboxed 16:9 movie.

 

 

 

 

•“CINEMA” mode is effective only when the MODE Dial is set to “VIDEO” or “

”.

 

 

 

 

 

 

 

SQUEEZE

For playback on TVs with an aspect ratio of 16:9. Naturally expands the image

 

 

 

to fit the screen without distortion.

 

appears. When using this mode, refer to

 

 

 

 

 

 

 

your wide-screen TV’s instruction

manual. During playback/recording on 4:3

 

 

 

 

TVs/LCD monitor/viewfinder, the image is elongated vertically.

 

 

 

 

 

•“SQUEEZE” mode is effective only when the MODE Dial is set to “VIDEO” or “

 

”.

 

 

 

 

 

 

 

PS-WIDE

SW ” appears. The zoom range is extended beyond the maximum optical

 

 

 

 

zoom wide angle range. This mode’s wide angle setting is equivalent to using

 

 

 

a 0.7X wide conversion lens. Zooming is possible from 0.7X to 10X. This

 

 

 

 

mode is suitable for shooting in a small room.

 

 

 

 

 

•“PS-WIDE” mode is effective only when the MODE Dial is set to “

”.

 

 

 

 

 

 

 

 

 

: Factory-preset

Image 30
Contents GR-DVM90 Dear Customer It is recommended that youPower Lines Power SourcesPower Cord Protection Grounding or PolarizationDamage Requiring Service AccessoriesCleaning Replacement PartsSafety Precautions Make sure you only use cassettes with the Mini DV markBattery Pack BN-V507U CU-V502U AA-V51U Remote Control UnitRM-V716U Cleaning Cloth Docking StationHow To Use Audio Cables Automatic DemonstrationLithium-ion is vulnerable in colder temperatures PowerCharging the Battery Pack About BatteriesTo Detach The Battery Pack Using the Battery PackUsing AC Power While sliding down BATT. RELEASE, detach it10 EN Grip AdjustmentViewfinder Adjustment Tripod MountingSet the Operation Switch to and set the Power Date/Time SettingsBuilt-in Clock’s Rechargeable Lithium Battery EN1112 EN Loading/Unloading a CassetteRecording Mode Setting EN1314 EN Loading a MultiMediaCardTo Unload a MultiMediaCard Picture Quality/Size Mode Setting EN15Approximate Number of Storable Images Operation Switch Position Manual Operation ModePower Switch Position 16 ENEN17 Mode Dial PositionProgressive Mode FunctionPress START/STOP To Adjust The Brightness Of The Display18 EN To Stop RecordingEN19 Journalistic ShootingSELF-RECORDING Snapshot For Video Recording Snapshot Mode SelectionMotor Drive Mode Snapshot RecordingBasic Shooting Snapshot To Delete Unwanted Still ImagesTo Remove The Shutter Sound Zoom Slide the Power Zoom Lever towards T22 EN Zoom OutWhen a blank portion is recorded on a tape EN23Proper recording Progressive Mode Recording To End Progressive Mode RecordingDescription of Progressive Scan CCD EN25Regular shooting of moving images Mode Dial to Dual ShootingEN27 Feature Auto FocusFeature Manual Focus To obtain correct focusUsing Menus For Detailed Adjustment If you have selected , orSee pg Menu Screen Explanations EN29After viewing demo, set to OFF Refer to Self-Timer  pgDemonstration will resume Automatic demonstration will not take placeEN31 Fires automatically if it is dark Appears Will not fire Perform the procedure belowSnapshot Flash Eyes Always firesFlash Brightness Adjustment EN33Self-Timer Mode Dial to Video Second RecordingEN35 Picture Wipe or Dissolve Selection Fade/Wipe EffectsFADE/WIPE Selection To Deactivate The Selected EffectEN37 Fader And Wipe MenuMenu Effect To Deactivate The Selected Mode Program AE With Special EffectsDigital Sound Effects Sound Effect Mode SelectionTo cancel recording the sound effect midway EN39Exposure Control Iris LockEN41 White Balance AdjustmentManual White Balance Operation To Return To Automatic White BalanceTo Control The Speaker Volume Available only with the remote control provided  pgFollowing procedure applies to all except Synchro Comp  pg Each setting is linked with Display MenuEN43 44 EN Playback SoundDisplay EN45 To cancel Blank Search midwayBlank Search Rotate the Menu wheel to select EXECUTE, then press itTo cancel E-Mail Clip Recording 46 ENMail Clip Recording Normal Playback Auto PlaybackImages shot with the camcorder are automatically Index Screen If you press Index twice Index PlaybackEN49 If you press Index three timesTo Protect a File 50 ENProtecting Files To Remove ProtectionTo Select a File by Browsing Files Stored in Memory Deleting FilesEN51 To Delete ALL Files52 EN Initializing a MultiMediaCardYou can initialize a MultiMediaCard anytime To Make The Print Frame Disappear Superimposing a Print FrameEN53 Press Print FrameDown the Lock Button located on the switch 54 ENPrint Frame Deletion EN55 To Delete ALL Print FramesPerform steps 1 through 4 on pag 56 EN Setting Print Information Dpof SettingTo Reset The Setting To Print ALL Still Images ONE Print for EachTo Reset The No. Of Prints EN57To Print by Selecting Still Images and NO. of Prints 58 EN Docking Station AttachmentIf using a VCR . . . go to step If not . . . go to step EN5960 EN Connection To a Personal ComputerConnection To a Video Unit Equipped With a DV Connector EN61Make sure all units are turned off Date/Time Set DATE/TIME to AUTO, on or OFF 62 ENDubbing To a VCR Set Time Code to on or OFF in the Menu Screen  pgEN63 To use this camcorder as a playerIndicator disappears when dubbing is complete 64 ENDubbing Images Stored In a MultiMediaCard To a Tape Dubbing Images Recorded On a Tape To a MultiMediaCard EN65Installing The Batteries Re-attach the battery compartment cover66 EN EN67 Functions ButtonsFeature Playback Zoom Feature Slow-Motion PlaybackFeature Frame-By-Frame Playback 68 ENFeature Playback Special Effects EN69VCR Recording deck 70 ENSET REMOTE/VCR Code Press Shift for this oneMake Connections JVC VCR equipped with a remote pause connectorEN71 VCR other than above72 EN Select ScenesEN73 Automatic Editing to VCRDiagnosing VCR/CAMCORDER Timing 74 ENFor More Accurate Editing Recording deckAdjustment of VCR/CAMCORDER Timing EN75Audio Dubbing Set 12BIT Mode to Sound 2 or MIX Menu Screen  pg76 EN To hear the dubbed sound during playbackAudio Dubbing Using Digital Sound Effects EN77Cleaning The Camcorder 78 ENAfter Use Troubleshooting Corrective ActionTroubleshooting 80 ENEN81 Was registered82 EN EN83 LCD monitor or Certain Fade/Wipe effects84 EN EN85 Auto Shut Off86 EN EN87 88 EN Appears while the tape is runningOrder of quality EN89 LCD Monitor/Viewfinder Indications During D.S.C. Playback Displays the sound modeLCD Monitor/Viewfinder Indications During Video Playback Displays the selected Digital Sound EffectEN91 Indications FunctionIndications While the Power Switch is set to92 EN  pgTemperature Range Specifications EN9394 EN EN95 96 EN EN97 Time Code  pg , 31, 43For Digital Video Camera 98 ENFor General For Digital Still CameraFor Connectors EN99GR-DVM90