JVC GR-FX50 manual Recording Advanced Features EN19, Fade/Wipe, Modeengage FADE- or WIPE-STANDBY

RECORDINGAdvancedFeaturesEN19

[Ex.: Fader]		Fade/Wipe
Fade in		These effects let you make pro-style scene transitions.
		Fade- or wipe-in works at recording start, and fade- or
		wipe-out works at recording end or when you enter
		Record–Standby mode.
		SELECT OPERATION MODE
		1 Set the Power Switch to “PRO.”.
		Fade out
Display		2 MODEENGAGE FADE- OR WIPE-STANDBY
	After 2 sec.	Press EFFECT to cycle through the modes as shown at
MOSAIC		left. Once the desired mode appears, it is selected
		and reserved.
		•The selected mode’s name and its indication are
		displayed for approx. 2 seconds. Then the name
		disappears, and only the indication remains.
		START OR END RECORDING
		3 Press the Recording Start/Stop Button to activate fade-
		in/out or wipe-in/out.
	FADER	4 MODETO CANCEL FADE- OR WIPE-STANDBY
	MOSAIC	Press EFFECT repeatedly until “OFF” appears.
	SHUTTER	•“OFF” is displayed for approx. 2 seconds and the
		fade/wipe standby mode is canceled.
	SLIDE
OFF	OFF	FADER
(No indication)

Fades in/out to a black screen.

RECORDING

EFFECT Button	Power
	Switch

Recording Start/Stop

Button

MOSAIC (Fader)

Gradually turns/returns the picture into/from a mosaic pattern.

SHUTTER (Wipe)

A black screen moves in from the top and bottom, closing over the image like a shutter, or a new image pushes open the black screen vertically from the centre.

SLIDE (Wipe)

A black screen moves in from the left to gradually cover the image, or a new image moves in from right to left.

NOTES:

●Pressing and holding the Recording Start/Stop Button allows you to vary the length for the image during fade in/out or wipe in/out.

●The screen becomes slightly reddish when the Fade/ Wipe is used with Sepia (☞ pg. 21).

●With the Electronic fog filter mode (☞ pg. 21) engaged, the image fades in/out to a white screen.