JVC GR-FXM65 specifications Date/Time Settings

System

Select Switch

MENU Button

Power lamp

Select Dial		Power Switch
Display
		Menu Screen
4NEXT	AUTO
M. W. B.
D . ZOOM	ON
TELE MACRO	OFF
DATE TIME
TAPE LENGTH T45
PICTURE	FINE
SNAPSHOT	FULL
4RETURN

EN11

Date/Time Settings

1 SELECTMODE OPERATION SYSTEM AND

Set the System Select Switch to “VIDEO” or “D.S.C.” , and set the Power Switch to “PRO.”.

•The power lamp comes on.

2 ACCESS MENU SCREEN

Press MENU.

3 SELECT FUNCTION

Rotate the Select Dial to move the highlight bar to “DATE/TIME”, then press it. The DATE/TIME Menu appears.

•If you decide you want to return the date and time to the previous settings, rotate the Select Dial to move the highlight bar to “EXIT” and press it, then go to step 7.

•If you want to set only the time without changing the date, go to step 5.

4 SET DATE

Rotate the Select Dial to move the highlight bar to the item you want to set and then press it. When the setting begins blinking, rotate the Select Dial until the correct setting appears and then press it. The setting stops blinking.

•Repeat this procedure until you’re satisfied with the Date settings (“YEAR”, “MONTH” and “DAY”).

5 SET TIME

DATETIME

YEAR		1999
MONTH		1
DAY	1
TIME	22 : 50

EXIT

4NEXT

M. W. B. AUTO

D . ZOOM ON TELE MACRO OFF DATETIME TAPE LENGTH T45

PICTURE FINE

SNAPSHOT FULL

4RETURN

DATE/TIME Menu

24-hour indication

Rotate the Select Dial to move the highlight bar to “TIME” and then press it. When the hour setting begins blinking, rotate the Select Dial until the correct setting appears and then press it. When the hour setting stops blinking and the minute setting begins blinking, rotate the Select Dial until the correct setting appears and then press it. The minute setting stops blinking.

6 START CLOCK OPERATION

When none of these settings (“YEAR”, “MONTH”, “DAY”, “TIME”) blinks, rotate the Select Dial to move the highlight bar to “EXIT”, and press it. The Menu Screen reappears with the highlight bar on “RETURN”.

7 CLOSE MENU SCREEN

Press the Select Dial.

NOTE:

To display the date and time in the camcorder’s display and on a connected TV, see “Date/Time Insert”

(☞ pg. 32).