EN
15
Journalistic shooting
In some situations different angles of shooting may be required for more dramatic results.
OPEN LCD MONITOR
1 Make sure the LCD monitor is fully open.
| TILT LCD MONITOR |
| Tilt the LCD monitor in the most convenient |
| 2 direction. |
| •The LCD monitor can rotate almost full circle |
| (270°: 90° downward, 180° upward). |
| Interface shooting |
| A person you shoot can view himself/herself in the LCD |
| monitor, and you can even shoot yourself while viewing |
| your own image in the LCD monitor. |
| TILT LCD MONITOR UPWARD |
| Open the LCD monitor and tilt it upward to 180 |
| 1 degrees so that it faces forward. |
| •When the LCD monitor is tilted upward to an |
| angle of over approx. 105 degrees, the monitor |
| image is inverted vertically, and the viewfinder |
| also switches on. |
| START RECORDING |
| Point the lens toward the subject (yourself when |
| 2 |
|
|
| •During Interface Shooting, the monitor image and |
| indications do not appear inverted as they would |
| when viewing a mirror. |
| NOTE: |
| During Interface Shooting, indications other than the |
| Date/Time display and Title display do not appear in the |
| viewfinder. |
| Brightness control |
| You can adjust the brightness of the LCD monitor by |
| turning the BRIGHT Dial. |
| ADJUST BRIGHTNESS |
| If you want to brighten the image . . . |
| 1 Turn the Dial towards “+”. |
BRIGHT Dial | If you want to darken the image . . . |
Turn the Dial towards |