JVC GR-AXM38EG LCD monitor or viewfinder, B. Menu Screen Select Dial Menu Jog Dial

NOTES:

Press the MENU Jog Dial.

4

CLOSE MENU

MEMORIZE WHITE BALANCE

Follow step 1 through 3 on page 32 (“Manual White Balance Adjustment”), select “MWB”.

SELECT MWB

Point the camcorder at a white, flat object such as a sheet of white paper.

1

2

3 Press the MENU Jog Dial until “MWB” begins blinking. “MWB” blinks while the white balance is being stored in memory, then the Menu Screen reappears when memorization is complete.

EN 33

MWB

MWB sets the colour temperature for the subject’s light source so you can shoot with natural colours that are unaffected by surroundings, even when there are multiple subjects with different colour temperatures.

PREPARE WHITE OBJECT

LCD monitor or viewfinder

M. W. B.

AUTO

: FINE

: CLOUD

: HALOGEN MWB

EXIT

M.W.B. Menu Screen

Select Dial

MENU Jog Dial

●To switch to automatic white balance adjustment, set the M.W.B. in the Menu Screen to “AUTO”, or turn the Select Dial to “AUTO LOCK”.

●Re-adjust the White Balance when the lighting has changed, when the camcorder has been turned off and on again, or when the Select Dial’s position has been changed.

●When adjusted by putting coloured paper in front of the subject in step 1 of “MWB”, this unit makes its colour temperature standard for automatic white balance. So you can enjoy shooting with different colours. For example, when adjusting with red, blue or yellow colours, the image becomes the colour which approximates to green, orange or purple respectively.