JVC GR-AXM4U manual Using Menu For Detailed Adjustment, Make Setting, Select Function AT SUB Menu

30

RECORDINGAdvancedFeatures(cont.)

Using Menu For Detailed Adjustment

This camcorder is equipped with Multi-Function Control, an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings.

Shooting mode selector

+

NEAR

FAR –

LCD monitor or viewfinder

Tele Macro	OFF
Gain Up	AGC
Color Filter	NOR .
Tape Length	T30
Title
Date/Time
Sub Menu

Main Menu screen

Tally	ON
Interval Timer	OFF
Rec Time	OFF
JLIP ID NO .	07

Sub Menu screen

PAUSE

♦

SELECT SHOOTING MODE

1 Set the Shooting Mode selector to “PRESET”.

ACCESS MAIN MENU SCREEN

2 Press MENU.

SELECT FUNCTION

3 Press + or – to place the highlight bar on the desired function.

MAKE SETTING

4 The setting procedure depends on the function you select.

If you select, Tele Macro, Gain Up, Color Filter or Tape Length, . . .

.... press FAR or NEAR to cycle through the choices

until the desired setting appears. Then go to step 8.

If you select Title or Date/Time, . . .

.... press NEAR to access the selection menu for

each function (Title – ☞ pg. 32; Date/Time –

☞pg. 11).

If you select “Sub Menu”, . . .

.... press NEAR to bring up the Sub Menu screen.

Go to step 5.

SELECT FUNCTION AT SUB MENU

5 Press + or – to place the highlight bar on the desired option, then press NEAR. The selected item begins blinking.

CHANGE SETTINGS

6 Press + or – to change the displayed setting of the selected function, then press FAR to enter your choice. The selected item stops blinking.

CLOSE SUB MENU

7 Press FAR, and setting is complete. The Sub menu screen disappears and the Main Menu screen reappears.

•To go directly past the Main Menu screen to the normal screen, press MENU.

CLOSE MAIN MENU

If any settings in the Main Menu have been	8	Press MENU. The normal screen reappears.
changed from the factory settings, this mark

appears in the LCD monitor or the viewfinder.