JVC GR-SX850 specifications Important Product Safety Instructions

Page 4

4EN

IMPORTANT PRODUCT SAFETY INSTRUCTIONS

Electrical energy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety. In order not to defeat the built-in safeguards, observe the following basic rules for its installation, use and servicing.

ATTENTION:

Follow and obey all warnings and instructions marked on your product and its operating instruc- tions. For your safety, please read all the safety and operating instructions before you operate this product and keep this manual for future reference.

5. Ventilation

Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered.

•Do not block the openings by placing the product on a bed, sofa, rug or other similar surface.

•Do not place the product in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

6. Wall or Ceiling Mounting

The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

ANTENNA INSTALLATION INSTRUCTIONS

1. Outdoor Antenna Grounding

INSTALLATION

1. Grounding or Polarization

(A)Your product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature.

If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

(B)Your product may be equipped with a 3-wire grounding-type plug, a plug having a third (ground- ing) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature.

If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

2. Power Sources

Operate your product only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. If your product is intended to operate from battery power, or other sources, refer to the operating instructions.

3. Overloading

Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

4. Power Cord Protection

Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

2. Lightning

For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

3. Power Lines

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

 

ANTENNA

 

LEAD IN WIRE

GROUND CLAMP

 

 

ANTENNA

 

DISCHARGE UNIT

 

(NEC SECTION

ELECTRIC SERVICE

810-20)

EQUIPMENT

GROUNDING CONDUCTORS

 

 

(NEC SECTION 810-21)

 

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250. PART H)

NEC – NATIONAL ELECTRICAL CODE

Page 3 Page 5
Image 4
Page 3 Page 5
Contents GR-SX850 AA-V16U AC Power Adapter/Charger should be used with It is recommended that youEN3 Important Product Safety Instructions To avoid personal injury If the product has been dropped or damaged in any wayUsing the battery pack To remove the battery packBN-V11U Major FeaturesCassettes marked and can be used with this camcorder Charging the Battery Pack PowerCharge Marker Using the Battery Pack Using AC PowerUsing a CAR Battery Slide Battery Release and pull out the battery packClock Lithium Battery Insertion/Removal 10 ENGetting Started Loading/Unloading a CassetteDate/Time Settings Press the Select Wheel to close the Menu ScreenTape Length Setting Recording Mode SettingEN Getting Started Recording Format Setting On Next14 EN ContRecordingPlayback VHS VCRGrip Adjustment Viewfinder AdjustmentShoulder Strap Attachment Tripod MountingSwitches off the camcorder Basic RecordingPRO OFFEN17 Viewfinder IndicationsEN Recording Basic Features Feature Picture StabilizerZoom Zoom OutTo check the end of the last recording Feature Quick ReviewTo re-record certain segments Basic Features Feature 5Sec. Rec 5-sec. Recording20 EN RecordingFade/Wipe Effects Recording Advanced Features EN21Fades in/out to a black screen Recording Advanced Features Nega Posi mode22 EN Program AE With Special EffectsPress the Select Wheel. The Menu Screen Appears Using Menus For Detailed AdjustmentRotate the Select Wheel until the desired number Advanced Features Menu Screen Available Using The Select WheelMenu Screen Available Using The Menu Button 24 ENVHS ET is preset to OFF Records in VHS on a VHS or S-VHS cassette pgRefer to Animation and Time-Lapse pg Refer to Time-Lapse pgDate/Time Insert 26 ENInstant Titles Animation Time-Lapse28 EN Exposure ControlFocusing Auto FocusManual Focus Patterns that are regularly repeatedSelect Auto in . Or set the Power Switch to Auto 30 ENManual White Balance Operation Video light or similar type of lighting is usedPlayback Basic Playback EN31Playback Features 32 ENCassette Adapter VHS Playpak Using The Cassette Adapter EN33VCR 34 EN When connecting the cables, open this coverPlayback Connections Basic Connections Tape DubbingInstalling The Batteries 36ENFunctions ButtonsSet Feature Animation and Time-LapseRelease 38 EN Insert EditingAudio Dubbing For Insert Editing and Audio Dubbing40 EN Review or Retake mode An error number i.e. E03 appearsLens Cover Warning indicator During recording, the indications do not appear42EN Diopter Adjustment Control Power Zoom Lever T/W Picture Stabilizer ButtonPower Switch Battery Release Switch44 EN IndexIndications During Recording IndicationsIndications During Playback Cassette IndicatorDisplayed during Insert Editing Using Household AC Plug Adapter Use only the following battery P6U or C-P7UTo prevent damage and prolong service life InformationFor safety, do not Avoid using the unitDuring use Store cassettes48 EN Electronic Fog Filter ModePg , 9 ND Effect Mode Nega/Posi Mode Quick Review Recording Format Recording ModeRemote Control Still Playback50 EN Cleaning The CamcorderAfter Use Jlip SpecificationsVTR 52 EN AlimentaciónCarga DE LA Bateria USO DE LA BateriaUtilización de la batería Deslice Battery Release y extraiga la bateríaPara extraer la batería 54 EN For Servicing Only in U.S.AWarranty Only in U.S.A Limited WarrantyGR-SX850
Top Page Image Contents