JVC GR-SX850 specifications EN Getting Started, Recording Mode Setting, Tape Length Setting

Set the Power Switch to “PRO.”, then press MENU.

12ENGETTINGSTARTED

Recording Mode Setting

(cont.)

Select Wheel

SP/EP Recording

Mode Button

Power Switch

Set depending on your preference.

1 Set the Power Switch to “AUTO” or “PRO.”. Press SP/ EP for more than 1 second. “SP” (Standard Play) provides higher picture and sound quality and is better for dubbing, while “EP” (Extended Play) is more economical, providing three times the recording time.

NOTE:

If the recording mode is switched during recording, the playback picture will be blurred at the switching point.

		MENU Button
	Viewfinder
	SP	T 3 0	Tape length indicator
			Recording mode
			indicator
	Display
T EL E MACRO		OF F
TAPE	L ENGTH	T 3 0	Menu Screen
4RE TURN
	TAPE L ENGTH		TAPE LENGTH
T 2 0			Setting Menu
T 3 0
T 3 5
T 4 0
EX I T
T EL E MACRO		OF F
TAPE	L ENGTH	T 4 0

4RE TURN

Tape Length Setting

Set the tape length according to the length of the tape used.

1

2 Rotate the Select Wheel to move the highlight bar to “TAPE LENGTH”, then press it. The TAPE LENGTH Setting Menu appears.

3 Rotate the Select Wheel to move the highlight bar to the correct tape length setting. T20=20 minutes of recording time, T30=30 minutes, T35=35 minutes, and T40=40 minutes (in SP).

•To return to the previous setting, rotate the Select Wheel to move the highlight bar to “EXIT”.

4 Press the Select Wheel. The Menu Screen reappears with the highlight bar on “RETURN”. Press the Select Wheel again to close the Menu Screen.

NOTE:

The tape remaining time (☞ pg. 16) displayed in the viewfinder is correct only if the correct tape length has been selected.