JVC GR-SXM530 specifications TBC indicator turns green gray with a camcorder equipped

	EN59
I T E M S	N O T E S
➪ VIDEO	❍ When the Power Switch is set to “ ” or “ ” and the LCD
RECORDING	monitor is opened at an angle of 60 degrees or more, the LCD
( pg. 18, 19)	monitor switches on and the viewfinder switches off automatically
	to save power.

❍The cassette holder cannot be opened unless a power supply is attached.

❍There may be a delay after you slide EJECT until the cassette holder opens. Do not use force.

❍The time required to calculate the remaining tape length, and the accuracy of the calculation, may vary according to the type of tape used.

❍The tape remaining time indicator is correct only if the correct tape length has been selected (
pg. 14).

❍“TAPE END” appears when the tape reaches its end, and the power goes off automatically if left in this condition for 5 minutes.

“TAPE END” also appears when a cassette whose tape is already at its end is loaded.

❍If the Recording Start/Stop button is pressed after the Record- Standby mode has continued for over 5 minutes, recording may not start immediately.

❍While shooting, sound is not heard from the speaker.

➪ TBC	❍ The “TBC” indicator turns green (gray with a camcorder equipped
(Time Base	with a black/white viewfinder) while TBC is working.
Corrector)	❍ TBC does not work during still playback and shuttle search.
( pg. 23)	❍ The “TBC” indicator turns white while TBC is not operative.
	❍ It may take a few seconds before TBC actually starts working.
	❍ The picture may be distorted if the TBC mode is activated or
	deactivated at the edit-in/-out points or when normal playback
	resumes after still playback or shuttle search.
	❍ If the playback picture is distorted when TBC is set to on, turn off
	TBC.