JVC GR-AXM917UM manual Power, Charging the Battery Pack, Using the Battery Pack

Page 10

10EN

Marks

To AC outlet

CHARGE indicator

REFRESH switch

REFRESH indicator

REFRESH

The AC Power Adapter/Charger features a REFRESH function that allows you to fully discharge the battery pack before recharg- ing.

Perform the REFRESH function after no less than 5 chargings.

To discharge the battery . . .

.... attach the battery pack to the adapter as

shown in the above illustration. Then push REFRESH. The REFRESH indicator lights when discharging starts, and goes out when discharging is complete.

GETTINGSTARTED

Power

This camcorder’s 3-way power supply system lets you choose the most appropriate source of power.

NOTES:

●No function is available without power supply.

●Use only the specified power supply.

●Do not use provided power supply units with other equipment.

CHARGING THE BATTERY PACK

1 SUPPLY POWER

Connect the charger’s AC power cord to a wall outlet.

2 ATTACH BATTERY PACK

Align the marks and slide the battery pack in the direction of the arrow until it locks in place.

•The CHARGE indicator begins blinking to indicate charging has started.

DETACH BATTERY PACK

 

3 When the CHARGE indicator stops blinking but stays lit,

charging is finished. Slide the battery pack opposite the

direction of the arrow.

 

 

 

 

 

Battery pack

Charging time

 

Discharging time

BN-V12U

approx. 1 hr. 10 min.

 

approx. 3 hrs. 30 min.

 

 

 

 

BN-V20U

approx. 1 hr. 50 min

 

approx. 6 hrs. 40 min.

AHook on.

B Push in.

BATTERY RELEASE

ATTENTION:

Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can result in a camcorder malfunction.

USING THE BATTERY PACK

ATTACH BATTERY PACK

1 Hook its end to the camcorder (

) and push the battery

pack in until it locks in place (

) .

DETACH BATTERY PACK

 

2 Slide BATTERY RELEASE and pull out the battery pack.

Approximate recording time (unit: min.)

 

 

 

 

 

 

LCD

LCD

LCD

Battery pack

monitor on/

monitor off/

monitor on/

 

Viewfinder off

Viewfinder on

Viewfinder on

BN-V12U

45 (30)

50 (35)

40 (30)

 

 

 

 

BN-V20U

80 (50)

85 (55)

70 (45)

( ) : when the video light is on.

INFORMATION:

VU-V856KIT is a set composed of the BN-V856U battery pack and AA-V80U AC Power Adapter/Charger.

The BN-V856U battery pack provides approx. 7 hours of recording time when the viewfinder is on and the LCD monitor and the video light are off. Also read thoroughly the VU-V856KIT’s instruction manuals.

It is impossible to charge the BN-V856U battery pack using the provided AC Power Adapter/Charger. Use the optional AA-V80U AC Power Adapter/Charger.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents GR-AXM917UM English It is recommended that you For clock operation and remote control unitDear Customer This unit is produced to comply with Standard IEC PublPower Lines Power SourcesPower Cord Protection OverloadingDamage Requiring Service AccessoriesCleaning Replacement PartsZoom Zoom out Cassettes marked can be used with this camcorderSlide Battery Release and pull out the battery pack Using the battery packTo remove the battery pack Image you shoot is recorded onto a video tapeSnapshot Button Quick Operation Guide D.S.C. EN7Open/Close Ring Set to Auto or PRO Contents Cassette Adapter Software programsCharging the Battery Pack PowerUsing the Battery Pack Charge Marker Using AC PowerUsing a CAR Battery Choose which one means charged and which means dischargedClock Lithium Battery Insertion/Removal Getting StartedDate/Time Settings EN Getting Started Recording Mode SettingTape Length Setting ContOpen Cassette Holder Loading/Unloading a CassetteOpen LCD Monitor Close Cassette HolderGrip Adjustment Viewfinder AdjustmentTripod Mounting Adjust LengthShoulder Strap Attachment Attach StrapLoad a Cassette Power Switch PositionBasic Recording Start ShootingStop Recording Tape remaining time indicatorLCD Monitor/Viewfinder Indications Press Display ButtonPower lamp Tally lamp Lights while recording is in progress Power Switch Recording Start/Stop ButtonBefore the following steps, perform pg Interface Shooting Journalistic ShootingBrightness Control Basic Shooting Mode SelectionStill Image Storage Motor Drive mode Snapshot mode with no frameRemaining number of shots 30 29 Picture mode display Feature Picture Mode SettingSnapshot Button System Select Switch Menu Button Normal ScreenEN25 Snapshot Mode Selection Recording Basic FeaturesSnapshot Snapshot Recording If you press during Record-Standby modeDisplay ex. Pin-Up Push the Power Zoom Lever towards T Basic FeaturesZoom To check the end of the last recording Feature Quick ReviewFeature Picture Stabilizer To re-record certain segmentsTo brighten the scene when natural lighting is too dim Feature Video LightLight OFF/AUTO/ON Switch Modeengage FADE- or WIPE-STANDBY Program AE With Special Effects Advanced FeaturesSelect Mode Press P.AE to cycle through the modes as shown on the leftTwilight SepiaSports ND EffectMonitor, as well as to record them manually or Recording Advanced FeaturesDate/Time Insert AutomaticallyPower Switch Menu Screen Title Menu Access Title MenuSystem Select Switch Select Dial Display Instant TitlesEND Setting Using Menu For Detailed AdjustmentMake Setting System Select Switch Select Dial Menu ButtonMenu Screen Available Using The Menu Button Menu Screen Available Using The Select DialMenu Screen Explanations Displayed only with the System Select Switch set to D.S.C Maximum telephoto setting. When set to ON, you can shoot aDisplayed with the System Select Switch set to either Video Tally lamp comes on to signal the start of recordingExposure Control Access Exposure MenuTo darken the image Auto Focus FocusingRecording Patterns that are regularly repeatedEND Adjustment of Focus Access Focus MenuAccess Manual Focus Manual FocusSET Function Parameters White Balance AdjustmentAccess White Balance Adjustment To Return To Automatic White BalancePress the Select Dial again to close the Menu Screen Enter SettingManual White Balance Operation To Change The Tint For RecordingStart Delayed Recording Self-TimerAccess INT. Time Menu If you set the System Select Switch to VideoAnimation Time-LapsePlay Back Video Playback Basic PlaybackRewind or Fast-Forward the tape Stop PlaybackAdjust Volume Video Playback Features EN47Speaker Volume Control TrackingFeature Shuttle Search EN Video Playback FeaturesFeature Still Playback Feature Counter Memory FunctionRecording safety hole Video Playback Using The Cassette Adapter EN49Insert Battery Cassette Adapter VHS PlaypakBasic Connections When connecting the cables, open this coverBasic Connections And Tape Dubbing Connection For Tape DubbingTape Dubbing Becomes blue C. Playback Basic PlaybackTo move Back Connect to Personal Computer Connection EN53Connection to a Windows PC END TransferringSlide-show will start pg C. Playback Advanced FeaturesProtect pg , Delete pg , 59 and do each procedure from step If you select any other functionsNever remove the power supply unit at this stage Mode EffectMenu Screen Explanations View Index Images Access Index MenuIndex Playback ScreenSET Protect Access Protect MenuProtect Way To complete Protect, go to stepTo quit the Delete Mode Access Delete MenuSelect Delete Mode DeleteAccess Delete Execute Menu X T DeleteRemote control uses one lithium battery CR2025 Installing The BatteryPull OUT Battery Holder FunctionsAnimation Feature Self-Timer, Animation and Time-LapseSelf-Timer Time-LapseEN Using the Remote Control Unit Insert Editing VideoTo insert still images in sequential order onto the tape Built-in Memory Onto a TapeSelect Still Image Press REW 2/PAGE- or FF 3/PAGE+ to move the page forwardEND Audio Dubbing Audio DubbingBegin Audio Dubbing Remote sensor Microphone Set to VideoCleaning The Camcorder After UseDuring recording, the indications do No power is suppliedSome functions are not available Not appearTroubleshooting When the System Select Switch is set to VideoWhen the System Select Switch is set to D.S.C Index Controls, Connectors And Indicators MENU/DISPLAY Button Counter Reset/Memory Button Video Light SwitchSystem Select Switch Recording Mode Button SP/EPIndex Indications EN71 Index Terms Digital Still CameraShooting Pg , 57Do not burn To prevent damage and prolong service lifeTo avoid hazard Plug adapterDuring use For safety, do notAvoid using the unit Store cassettesAbout moisture condensation To prolong service lifeTo prevent damage to the LCD monitor, do not Serious malfunctioningProvided Accessories Optional Accessories ConnectorsGeneral Memo Memo GR-AXM917UM

GR-AXM917UM specifications

The JVC GR-AXM917UM is a compact yet powerful camcorder that exemplifies the cutting-edge technology of its time. Launched in the late 1990s, this model is part of JVC's renowned line of handheld camcorders, providing users with an impressive blend of portability and functionality.

One of the standout features of the GR-AXM917UM is its advanced image capture technology. It is equipped with a 1/6-inch CCD sensor, which delivers vibrant colors and sharp images. This technology helps ensure that both video and still photos maintain clarity, even in varying lighting conditions. The camcorder supports Super VHS format, offering enhanced resolution compared to standard VHS, thereby allowing for more detailed footage.

The JVC GR-AXM917UM features a powerful 25x optical zoom lens, which is pivotal for expanding shooting capabilities. This optical zoom allows users to capture distant subjects without sacrificing image quality. Coupled with a digital zoom capability, the camcorder can reach a magnification of 900x, making it versatile for a variety of shooting scenarios. This is particularly advantageous for capturing sporting events or wildlife where subjects can be far away.

Furthermore, the camcorder incorporates a built-in editing feature known as the "0 Lux Night Vision." This technology allows the GR-AXM917UM to record video in extremely low light conditions, expanding its usability into night-time environments. The result is clear imagery even in dimly lit settings, providing creators with the flexibility to shoot at any time of day.

In terms of user-friendliness, the JVC GR-AXM917UM boasts an ergonomic design with accessible controls. It features a 2.5-inch LCD screen that provides necessary feedback while recording. This flip-out display allows users to frame shots easily and review footage on the spot. The camcorder also includes a variety of playback options to facilitate easy viewing and editing.

Additionally, this model offers an array of connectivity options. With AV outputs, users can easily connect the camcorder to TVs or VCRs for seamless playback. The GR-AXM917UM utilizes a standard battery pack, which ensures users can enjoy extended recording sessions without frequent interruptions.

Overall, the JVC GR-AXM917UM combines a range of innovative features, advanced imaging technology, and user-friendly design, making it a remarkable choice for budding videographers and seasoned filmmakers alike. Its capabilities provide a platform for capturing life's moments with depth and clarity, reflecting JVC's commitment to quality and performance in the world of home video production.
Top Page Image Contents