JVC GR-AXM917UM manual Menu Screen Explanations, Mode Effect

					EN	55
Menu Screen Explanations
		Mode		Effect
	INDEX		All still images stored in memory can be displayed six at a time. This mode is a
			convenient way to look for the still image you want to view and to check the still
			images you shot beforehand (☞ pg. 56).
	SLIDE SHOW 1		After doing steps 1 through 4 on pg. 54, you can run through all the still images
			stored in memory automatically in numerical order. Each still image is displayed.
			This mode is like a regular slide-show. If you wish to stop the slide-show, press the
			Select Dial twice.

SLIDE SHOW 2	After doing steps 1 through 4 on pg. 54, you can run through all the still images
	stored in memory automatically in numerical order. The still image wipes in over
	the last one from the bottom of the screen to the top. If you wish to stop the slide-
	show, press the Select Dial twice.

PROTECT	Lets you protect selected still images from accidental erasure. Select a still image for
	which you want to perform “Protect” to put a padlock mark next to it. A still image
	with a padlock mark cannot be deleted. When selecting a still image to protect, you
	can check six still images stored in memory at a time (☞ pg. 57).
DELETE	Allows you to delete some still images already stored in memory (☞ pg. 58).
	CAUTION:
	While “ENTER” is selected on the Delete Execute Menu and it is blinking, switching
	off the camcorder or removing the power supply unit (battery pack or AC Power
	Adapter/Charger) may cause the camcorder’s built-in memory to become corrupt.
	Never remove the power supply unit at this stage.
	SELECT	Allows you to check 6 still images stored in memory at a time, to select
		the still images you want to delete.
	ALL	Allows you to delete all the still images at once except protected
		images.