JVC GR-AXM917UM manual Troubleshooting, When the System Select Switch is set to Video

Page 67

TROUBLESHOOTING(cont.)

When the System Select Switch is set to “VIDEO”:

EN67

SYMPTOM

 

POSSIBLE CAUSE(S)

RECORDING

 

 

Recording cannot be performed.

 

● Make sure the Erase Protection tab is in the position that

 

 

allows recording. If not, slide the tab. Some cassettes have

 

 

removable tabs. If the tab has been removed, cover the

 

 

hole with adhesive tape (☞ pg. 15).

 

 

● If the System Select Switch is set to “D.S.C.”, it is not

 

 

possible to record onto the tape. Change the Switch

 

 

position to “VIDEO” (☞ pg. 18).

 

 

 

Recording does not start.

 

● The camcorder Power Switch has not been set to

 

 

“CAMERA” (“AUTO“ or “PRO.“) (☞ pg. 18).

 

 

 

PLAYBACK

 

 

The tape is running, but there is no

 

● The TV has not been set to its VIDEO mode or channel.

playback picture.

 

● If A/V connection is used, the TV’s VIDEO/TV Switch has

 

 

not been set to VIDEO.

 

 

 

Playback cannot be performed.

 

● If the System Select Switch is set to “D.S.C.”, it is not

 

 

possible to play back a tape. Change the Switch position to

 

 

“VIDEO” (☞ pg. 46).

 

 

 

Playback picture is blurred or

 

● The video heads are dirty or worn out. Consult your nearest

interrupted.

 

JVC dealer for head cleaning or replacement.

 

 

 

The counter indication is blurred

 

● This is normal.

during Still playback.

 

 

 

 

 

TAPE TRANSPORT

 

 

The tape stops during fast-forward or

 

● The Counter Memory Function has been activated

rewind.

 

(☞ pg. 48).

 

 

 

Rewinding or fast-forwarding cannot

 

● The tape is already fully wound on one reel or the other.

be performed.

 

 

 

 

 

OTHER

 

 

The picture is blurred in the Quick

 

● This is normal while recording in the EP mode. Some noise

Review or Retake mode.

 

may be present while recording in the SP mode

 

 

(☞ pg. 14).

 

 

 

The date and time displays

 

● If you remove the power source from the camcorder while

disappear.

 

the power is on, all settings and selections are erased. Make

 

 

sure to turn the camcorder’s power off before disconnecting

 

 

the power source.

 

 

 

The wrong date and time are

 

● If you have not performed Date/Time Setting (☞ pg. 13),

displayed/recorded.

 

the date and time are not displayed/recorded correctly. Be

 

 

sure that Date/Time setting is carried out.

The tape will not eject.

●The battery pack is running low.

●If the LCD monitor is not open over 60 degrees, EJECT switch does not function.

Page 66 Page 68
Image 67
Page 66 Page 68
Contents GR-AXM917UM English This unit is produced to comply with Standard IEC Publ For clock operation and remote control unitDear Customer It is recommended that youOverloading Power SourcesPower Cord Protection Power LinesReplacement Parts AccessoriesCleaning Damage Requiring ServiceCassettes marked can be used with this camcorder Zoom Zoom outImage you shoot is recorded onto a video tape Using the battery packTo remove the battery pack Slide Battery Release and pull out the battery packSnapshot Button Quick Operation Guide D.S.C. EN7Open/Close Ring Set to Auto or PRO Contents Software programs Cassette AdapterCharging the Battery Pack PowerUsing the Battery Pack Choose which one means charged and which means discharged Using AC PowerUsing a CAR Battery Charge MarkerGetting Started Clock Lithium Battery Insertion/RemovalDate/Time Settings Cont Recording Mode SettingTape Length Setting EN Getting StartedClose Cassette Holder Loading/Unloading a CassetteOpen LCD Monitor Open Cassette HolderViewfinder Adjustment Grip AdjustmentAttach Strap Adjust LengthShoulder Strap Attachment Tripod MountingStart Shooting Power Switch PositionBasic Recording Load a CassettePress Display Button Tape remaining time indicatorLCD Monitor/Viewfinder Indications Stop RecordingPower lamp Tally lamp Lights while recording is in progress Power Switch Recording Start/Stop ButtonBefore the following steps, perform pg Interface Shooting Journalistic ShootingBrightness Control Basic Shooting Mode SelectionStill Image Storage Motor Drive mode Snapshot mode with no frameRemaining number of shots 30 29 Normal Screen Feature Picture Mode SettingSnapshot Button System Select Switch Menu Button Picture mode displayEN25 Snapshot Mode Selection Recording Basic FeaturesSnapshot Snapshot Recording If you press during Record-Standby modeDisplay ex. Pin-Up Push the Power Zoom Lever towards T Basic FeaturesZoom To re-record certain segments Feature Quick ReviewFeature Picture Stabilizer To check the end of the last recordingTo brighten the scene when natural lighting is too dim Feature Video LightLight OFF/AUTO/ON Switch Modeengage FADE- or WIPE-STANDBY Press P.AE to cycle through the modes as shown on the left Advanced FeaturesSelect Mode Program AE With Special EffectsND Effect SepiaSports TwilightAutomatically Recording Advanced FeaturesDate/Time Insert Monitor, as well as to record them manually orInstant Titles Access Title MenuSystem Select Switch Select Dial Display Power Switch Menu Screen Title MenuSystem Select Switch Select Dial Menu Button Using Menu For Detailed AdjustmentMake Setting END SettingMenu Screen Available Using The Menu Button Menu Screen Available Using The Select DialMenu Screen Explanations Tally lamp comes on to signal the start of recording Maximum telephoto setting. When set to ON, you can shoot aDisplayed with the System Select Switch set to either Video Displayed only with the System Select Switch set to D.S.CExposure Control Access Exposure MenuTo darken the image Patterns that are regularly repeated FocusingRecording Auto FocusManual Focus Access Focus MenuAccess Manual Focus END Adjustment of FocusTo Return To Automatic White Balance White Balance AdjustmentAccess White Balance Adjustment SET Function ParametersTo Change The Tint For Recording Enter SettingManual White Balance Operation Press the Select Dial again to close the Menu ScreenIf you set the System Select Switch to Video Self-TimerAccess INT. Time Menu Start Delayed RecordingTime-Lapse AnimationStop Playback Video Playback Basic PlaybackRewind or Fast-Forward the tape Play BackTracking Video Playback Features EN47Speaker Volume Control Adjust VolumeFeature Counter Memory Function EN Video Playback FeaturesFeature Still Playback Feature Shuttle SearchCassette Adapter VHS Playpak Video Playback Using The Cassette Adapter EN49Insert Battery Recording safety holeConnection For Tape Dubbing When connecting the cables, open this coverBasic Connections And Tape Dubbing Basic ConnectionsTape Dubbing Becomes blue C. Playback Basic PlaybackTo move Back END Transferring Connection EN53Connection to a Windows PC Connect to Personal ComputerIf you select any other functions C. Playback Advanced FeaturesProtect pg , Delete pg , 59 and do each procedure from step Slide-show will start pgNever remove the power supply unit at this stage Mode EffectMenu Screen Explanations Playback Screen Access Index MenuIndex View Index ImagesWay To complete Protect, go to step Access Protect MenuProtect SET ProtectDelete Access Delete MenuSelect Delete Mode To quit the Delete ModeX T Delete Access Delete Execute MenuFunctions Installing The BatteryPull OUT Battery Holder Remote control uses one lithium battery CR2025Time-Lapse Feature Self-Timer, Animation and Time-LapseSelf-Timer AnimationInsert Editing Video EN Using the Remote Control UnitPress REW 2/PAGE- or FF 3/PAGE+ to move the page forward Built-in Memory Onto a TapeSelect Still Image To insert still images in sequential order onto the tapeRemote sensor Microphone Set to Video Audio DubbingBegin Audio Dubbing END Audio DubbingAfter Use Cleaning The CamcorderNot appear No power is suppliedSome functions are not available During recording, the indications doWhen the System Select Switch is set to Video TroubleshootingWhen the System Select Switch is set to D.S.C Index Controls, Connectors And Indicators Recording Mode Button SP/EP Video Light SwitchSystem Select Switch MENU/DISPLAY Button Counter Reset/Memory ButtonIndex Indications EN71 Digital Still Camera Index TermsPg , 57 ShootingPlug adapter To prevent damage and prolong service lifeTo avoid hazard Do not burnStore cassettes For safety, do notAvoid using the unit During useSerious malfunctioning To prolong service lifeTo prevent damage to the LCD monitor, do not About moisture condensationProvided Accessories Optional Accessories ConnectorsGeneral Memo Memo GR-AXM917UM

GR-AXM917UM specifications

The JVC GR-AXM917UM is a compact yet powerful camcorder that exemplifies the cutting-edge technology of its time. Launched in the late 1990s, this model is part of JVC's renowned line of handheld camcorders, providing users with an impressive blend of portability and functionality.

One of the standout features of the GR-AXM917UM is its advanced image capture technology. It is equipped with a 1/6-inch CCD sensor, which delivers vibrant colors and sharp images. This technology helps ensure that both video and still photos maintain clarity, even in varying lighting conditions. The camcorder supports Super VHS format, offering enhanced resolution compared to standard VHS, thereby allowing for more detailed footage.

The JVC GR-AXM917UM features a powerful 25x optical zoom lens, which is pivotal for expanding shooting capabilities. This optical zoom allows users to capture distant subjects without sacrificing image quality. Coupled with a digital zoom capability, the camcorder can reach a magnification of 900x, making it versatile for a variety of shooting scenarios. This is particularly advantageous for capturing sporting events or wildlife where subjects can be far away.

Furthermore, the camcorder incorporates a built-in editing feature known as the "0 Lux Night Vision." This technology allows the GR-AXM917UM to record video in extremely low light conditions, expanding its usability into night-time environments. The result is clear imagery even in dimly lit settings, providing creators with the flexibility to shoot at any time of day.

In terms of user-friendliness, the JVC GR-AXM917UM boasts an ergonomic design with accessible controls. It features a 2.5-inch LCD screen that provides necessary feedback while recording. This flip-out display allows users to frame shots easily and review footage on the spot. The camcorder also includes a variety of playback options to facilitate easy viewing and editing.

Additionally, this model offers an array of connectivity options. With AV outputs, users can easily connect the camcorder to TVs or VCRs for seamless playback. The GR-AXM917UM utilizes a standard battery pack, which ensures users can enjoy extended recording sessions without frequent interruptions.

Overall, the JVC GR-AXM917UM combines a range of innovative features, advanced imaging technology, and user-friendly design, making it a remarkable choice for budding videographers and seasoned filmmakers alike. Its capabilities provide a platform for capturing life's moments with depth and clarity, reflecting JVC's commitment to quality and performance in the world of home video production.
Top Page Image Contents