JVC GR-AXM917UM manual Access Focus Menu, Access Manual Focus, END Adjustment of Focus

System

Select Switch

Select Dial

Display

FOCUS AUTO

EXPOSURE AUTO

WIDEOFF

S . LXOFF TITLE

DATE TIME DISP.

4RETURN

FOCUS

AUTO

MANU

EXIT

Power Switch

Menu Screen

FOCUS Menu

Manual Focus Screen

EN41

MANUAL FOCUS

NOTE:

You should already have made the necessary viewfinder adjustments (☞ pg. 16). If you haven’t, do so before continuing.

1 SELECTMODE OPERATION SYSTEM AND

Set the System Select Switch to “D.S.C.” or “VIDEO”, and set the Power Switch to “PRO.”.

2 ACCESS MENU SCREEN

Press the Select Dial to display the Menu Screen.

3 ACCESS “FOCUS” MENU

Move the hightlight bar to “FOCUS” by rotating the Select Dial, then press it.

4 ACCESS MANUAL FOCUS

Rotate the Select Dial to move the highlight bar to “MANU”, then press it. “” and “” appear. The focus is locked at this point.

5 ADJUST FOCUS To farther subject . . .

.... rotate the Select Dial upward. “” appears and

blinks.

Go to step 6.

To nearer subject . . .

.... rotate the Select Dial downward. “” appears

and blinks. Go to step 6.

6 END ADJUSTMENT OF FOCUS

Press the Select Dial. The Menu Screen reappears with the highlight bar on “RETURN”.

7 CLOSE MENU SCREEN

Press the Select Dial. The Menu Screen disppears and “ ” reappears to indicate the focus is locked.

NOTES:

●To return to Auto Focus, select “AUTO” in step 4.

●To re-adjust Manual Focus, repeat the procedure from step 2.

●Be sure to focus the lens in the maximum telephoto position when you use the Manual Focus mode. If you focus in on a certain subject in the wide-angle position, sharply focused images cannot be obtained when zoomed in because the depth-of-field is reduced at longer focal lengths.

●When the focus level cannot be adjusted any farther or closer, “” or “” will blink.