JVC LYT0291-001B manual Stop Recording, Press IND. ON/OFF Button

Page 17

IND. ON/OFF

Button

Recording Start/Stop Button

Tape remaining time indicator

25 min min

(Now calculating)

90min

89min

3min

2min

(Blinking)

1min

(Blinking)

0min

(Blinking)

EN17

4

 

STOP RECORDING

 

 

 

Press the Recording Start/Stop Button again to stop

 

 

 

recording.

 

 

 

 

 

 

 

 

•The camcorder re-enters the Record-Standby mode.

 

NOTES:

 

● The image will not appear simultaneously in the LCD

 

monitor and the viewfinder. No image appears on the

 

LCD monitor when the viewfinder is pulled out. It is not

 

possible to shoot using both LCD monitor and view-

 

finder. However, during Interface Shooting (☞ pg. 19)

 

the image appears simultaneously in the LCD monitor

 

and the viewfinder.

 

● The cassette holder cannot be opened unless a power

 

supply is attached.

 

● There may be a delay after you open the cassette cover

 

until the holder opens. Do not use force.

 

● The tape remaining time is only displayed in the

 

viewfinder as shown.

 

 

● The indicated tape remaining time is approximate.

 

● The time required to calculate and to display the

RECORDING

remaining tape length, and the accuracy of the calcula-

 

tion, may vary according to the type of tape used.

 

● “TAPE END” appears when the tape reaches its end, and

 

the power goes off automatically if left in this condition

 

for 5 minutes. “TAPE END” also appears when a cassette

 

whose tape is already at its end is loaded.

 

● If the Record-Standby mode continues for 5 minutes, the

 

camcorder’s power shuts off automatically. To turn the

 

camcorder on again, push back and pull out the

 

viewfinder again or close and re-open the LCD monitor.

 

● When a blank portion is left between recorded scenes

 

on the tape, the time code is interrupted and errors may

 

occur when editing the tape. Continue recording from

 

where you stop so that there are no gaps by following

 

“Recording from the middle of a tape” (☞ pg. 21).

 

● During recording, sound is not heard from the speaker. If

 

you want to hear the sound, connect optional head-

 

phones to the headphones connector. The sound

 

volume at this point is the same as the level it was

 

adjusted during playback.

 

● To turn the tally lamp off during recording, refer to pgs.

 

30 and 32.

 

LCD Monitor/Viewfinder Indications

 

You can make the LCD monitor/Viewfinder indications

 

appear/disappear.

 

 

 

 

 

 

1

 

PRESS IND. ON/OFF BUTTON

 

 

To turn off the indications, press IND. ON/OFF for

 

 

 

more than 1 second.

 

 

 

Press again for more than 1 second to make the

 

 

 

indications reappear.

 

NOTE:

 

It is impossible to make the tape running indicator “ 444”

 

and warnings etc. disappear from the LCD monitor or the

 

viewfinder. For the indications that can be removed,

 

☞ pg. 76 and 77.

 

Page 16 Page 18
Image 17
Page 16 Page 18
Contents For Customer Use GR-DVL9500It is recommended that you Dear CustomerPower Cord Protection Power SourcesPower Lines Grounding or PolarizationCleaning AccessoriesDamage Requiring Service Replacement PartsCleaning Cloth Remote Control Unit RM-V711UMin DVM-30 Shoulder StrapAbout DV Contents Charging the Battery Pack PowerUsing AC Power Using the Battery PackAttach Battery Pack To Detach The Battery PackCont Date/Time SettingsBattery Open Cassette Cover Loading/Unloading a CassetteINSERT/REMOVE Tape Close Cassette CoverSet depending on your preference Recording Mode SettingSET Recording Mode Viewfinder Adjustment Grip AdjustmentShoulder Strap Attachment Adjust LengthTripod Mounting Attach StrapOperation Mode Start Shooting Recording Basic RecordingLoad a Cassette Press IND. ON/OFF Button Stop RecordingShooting While Watching The LCD Monitor Brightness Control Journalistic ShootingInterface Shooting Push the Power Zoom Lever towards W Push the Power Zoom Lever towards TBasic Recording ZoomAfter playing back the recorded tape, when you shoot again When blank portion is recorded on a tapeProper recording ShootingDisplaying The Date And Time During Recording EN Recording Advanced FeaturesSelect Function SET Function ParametersEND 5S Mode Engage 5S ModeDissolves during 5 second recording mode Scene 5-second recordingProgressive Mode Recording Recording Advanced FeaturesStart Progressive Mode Recording To End Progressive Video RecordingRegular shooting of moving images Description of Progressive Scan CCDPRO Snapshot Mode Selection Advanced FeaturesPro Snapshot PRO Snapshot RecordingTo Remove The Shutter Sound Motor Drive ModeProgressive Mode Snapshot Flash Auto Flash If the Power Switch is set toEngage RECORD-STANDBY Take SnapshotAccess Manual Mode Item Menu Flash Brightness AdjustmentAccess Flash Adjustment Adjust Brightness of FlashUsing Menu For Detailed Adjustment Recording Menu Explanations Factory-presetSystem Menu Explanations Date/Time Menu ExplanationsFADE/WIPE Selection Fade/Wipe EffectsEffect Selection Picture Wipe or Dissolve Selection Store Scene in Memory Engage the Record-Standby modeBefore the following steps, perform steps 1 through 4 on pg If you select Picture Wipe/Dissolve during recordingMenu Fader And Wipe MenuProgram AE With Special Effects Select ModeDisable Mode Classic Film ShutterTwilight SepiaPatterns that are regularly repeated FocusingAuto Focus Adjust Focus Access Manual FocusEND Adjustment of Focus Manual FocusIf you want to reset the exposure, repeat step Access Exposure ControlExposure Control To darken the imageIris Center SUBJECT, Lock IrisTo Return To Automatic Iris Control To Lock The Exposure Control And The IrisAccessment White Balance Adjust White Balance AdjustmentWhen using a video light or other similar type of lighting Select Auto in . Or set the Power Switch toAdjustment Enter SettingManual White Balance Operation SET Manual White BalanceEND Recording High Speed RecordingEngage High Speed Recording Standby Playback Basic Playback Adjust VolumeRewind or Fast-forward the tape Play BackBasic Playback END Playback Progressive Slow-Motion PlaybackFind Scene of Interest Playback Menu allows you to set the following functions Playback MenuClose Menu Recording sound Display Output sound Playback SoundDisplaying The Time Code During Playback Basic Connections When connecting the cables, open this coverUse the provided S-Video cable and Audio/Video cable Use the provided and Audio/Video cablePower Switch back to Connectinput VCR Output to TV Supply PowerConnectvcr Camcorder to TV or Turn on the camcorder, the VCR and the TVConnect Camcorder to PC Turn on PowerConnect Printer to PC if Necessary Connection To a Video Unit Equipped With a DV ConnectorTape Dubbing Make Connections Digital DubbingStart Playback Press Play 4 to play back the source tapePull OUT Battery Holder Installing The BatteryInsert Battery in Holder RE-INSERT HolderFunctions Buttons $ #Using the Remote Control Unit EN59 SET REMOTE/VCR Code Random Assemble Editing R.A.EditSET Remote to Operate VCR Operate VCRSelect Scenes Make ConnectionsSET EDIT-IN Point Select ScenesSET EDIT-OUT Point USE FADE/WIPE on Scene Transition if NecessaryStop Editing Automatic Editing to VCRPrepare Source Tape Diagnosing VCR’S Against Camcorder Timing For More Accurate EditingPrepare for R.A. Edit Choose a SceneInput Correction Data Adjustment of VCR’S Against Camcorder TimingAccess Playback Menu Begin Dubbing Audio DubbingPause During Dubbing Stop DubbingFind Edit OUT Point Insert EditingFind Edit in Point Prepare for Insert EditingCorrective Action TroubleshootingEN69 Troubleshooting EN71 Corrective Action EN TroubleshootingAfter Use User Maintenance74EN Tally Lamp Power Lamp # Date/Time Reset Button ResetRed-Eye Reduction Button Control VOLIndications LCD Monitor/Viewfinder Indications During RecordingFunction 444Indications Function LCD Monitor/Viewfinder Indications During PlaybackSound Mode Monotone Motor Drive ModePg , 9 Pg , 50To prolong service life Temperature Range SpecificationsPlug adapter To avoid hazardAvoid using the unit For safety, do notDirty heads can cause the following problems Do not leave the unitTrade Name Declaration of Conformity Model NumberAddress Telephone NumberConnectors AC Power Adapter/Charger AA-V68UCamcorder GeneralMemo EN83 GR-DVL9500

LYT0291-001B specifications

The JVC LYT0291-001B is a versatile and innovative camcorder that stands out in the realm of consumer and professional video recording. Designed with advanced features and cutting-edge technologies, it caters to both amateur filmmakers and seasoned videographers looking for quality and functionality in their recording equipment.

One of the standout features of the LYT0291-001B is its high-definition video recording capability. It supports 4K resolution, providing stunning visual clarity and detail that allows users to capture life’s moments in exceptional quality. This feature is complemented by a sophisticated lens system that incorporates various optical technologies to enhance image quality, minimize distortion, and improve low-light performance.

The camcorder is equipped with advanced stabilization technology, which plays a crucial role in creating smooth and stable footage, even in dynamic shooting situations. This is particularly beneficial for capturing action-packed scenes or while on the move, as it helps eliminate the shake commonly found in handheld video recording.

Another notable characteristic of the LYT0291-001B is its user-friendly interface. With intuitive controls and customizable settings, users can easily navigate through different recording modes, including manual and automatic options. This flexibility allows for creative freedom, enabling filmmakers to tailor their shooting experience according to their specific needs.

The camcorder also features robust connectivity options, including Wi-Fi and HDMI outputs. This makes it easy to transfer files to other devices or to live-stream content, a capability that is increasingly important in today's interconnected world. Additionally, the LYT0291-001B supports various media formats, providing versatility in post-production editing.

In terms of design, JVC has kept ergonomics in mind, ensuring that the LYT0291-001B is comfortable to hold during extended shooting sessions. Its lightweight body and compact size make it a convenient option for on-the-go videography, while its durable construction ensures it can withstand the rigors of everyday use.

Overall, the JVC LYT0291-001B is a feature-rich camcorder that combines quality, ease of use, and innovative technology. Whether you're capturing family gatherings, outdoor adventures, or professional projects, this camcorder promises to deliver exceptional video results that meet the demands of a modern videographer. With its impressive capabilities, it positions itself as a formidable choice in the competitive camcorder market.
Top Page Image Contents