JVC LYT0291-001B manual Digital Dubbing, Make Connections, Start Playback

Page 55

To DV IN/OUT

DV cable (optional)

Lock Button

PLA

Y

O

F

F

5S

Power Switch

EN55

Digital Dubbing

It is also possible to copy recorded scenes from the camcorder onto other video unit equipped with a DV connector. Since a digital signal is sent, there is little if any image or sound deterioration.

1 CONFIRM POWER-OFF STATUS Make sure the camcorder’s power is off.

2 MAKE CONNECTIONS

Connect the camcorder to your video unit equipped with a DV connector using the DV cable (optional) as shown in the illustration.

3 START PLAYBACK

Press PLAY (4) to play back the source tape.

4 START RECORDING

To DV IN/OUT

Video unit equipped with DV connector

 

RM-V711U

T W

(provided)

 

PLAY (4)

 

STOP (5)

While watching the playback on the monitor, engage the DV connector-equipped video unit’s record mode from the spot on the source tape you want to begin recording.

NOTES:

●It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack (☞ pg. 9).

●If the remote control is used when both the player and recorder are JVC video units, both units will perform the same operation. To prevent this from happening, press the buttons on both units.

●For Digital Dubbing, this camcorder can be connected only to one device at a time. This camcorder can also be used as a recorder.

●If a blank portion is played back on the player during dubbing when this camcorder is used as a recorder, this camcorder enters Record-Standby mode so that an usual image is not dubbed.

●Even though the DV cable is connected correctly, some- times the image may not appear in step 3. If the above occurs, turn off power and make connections again.

●If “Playback Zoom” (☞ pg. 58), “Playback Special Effects” (☞ pg. 59) or “Snapshot” is attempted during playback, only the original playback image recorded on the tape is output from the DV OUT connector.

●During Digital Dubbing, the scenes recorded in High Speed Recording mode are divided into 2, and the image is

displayed both in the upper and lower halves of the screen (☞ pg. 47).

●Be sure to use a DV cable with the noise filter.

To Use This Camcorder As A Recorder . . .

1.Turn the Power Switch to “ ” while pressing down the Lock Button located on it.

2.Connect the DV cable as shown in the illustration and load a cassette to record on.

3.Press the Recording Start/Stop Button to engage the Record-Pause mode. “DV IN” appears on the screen.

4.Press the Recording Start/Stop Button to start recording. “DV IN” changes to “ DV IN ”.

5.Press the Recording Start/Stop Button again to engage the Record-Pause mode. “ DV IN ” returns to “DV IN”.

NOTES:

●During Digital Dubbing, the image is dubbed using the recording mode selected in the Recording Menu (☞ pg. 12).

●Digital Dubbing is performed in the sound mode recorded on the original tape, regardless of the current “SOUND MODE” setting (☞ pg. 32).

Page 54 Page 56
Image 55
Page 54 Page 56
Contents For Customer Use GR-DVL9500It is recommended that you Dear CustomerGrounding or Polarization Power SourcesPower Cord Protection Power LinesReplacement Parts AccessoriesCleaning Damage Requiring ServiceShoulder Strap Remote Control Unit RM-V711UCleaning Cloth Min DVM-30About DV Contents Charging the Battery Pack PowerTo Detach The Battery Pack Using the Battery PackUsing AC Power Attach Battery PackBattery Date/Time SettingsCont Close Cassette Cover Loading/Unloading a CassetteOpen Cassette Cover INSERT/REMOVE TapeSET Recording Mode Recording Mode SettingSet depending on your preference Viewfinder Adjustment Grip AdjustmentAttach Strap Adjust LengthShoulder Strap Attachment Tripod MountingOperation Mode Load a Cassette Recording Basic RecordingStart Shooting Press IND. ON/OFF Button Stop RecordingShooting While Watching The LCD Monitor Interface Shooting Journalistic ShootingBrightness Control Zoom Push the Power Zoom Lever towards TPush the Power Zoom Lever towards W Basic RecordingShooting When blank portion is recorded on a tapeAfter playing back the recorded tape, when you shoot again Proper recordingSET Function Parameters EN Recording Advanced FeaturesDisplaying The Date And Time During Recording Select FunctionScene 5-second recording Engage 5S ModeEND 5S Mode Dissolves during 5 second recording modeTo End Progressive Video Recording Recording Advanced FeaturesProgressive Mode Recording Start Progressive Mode RecordingRegular shooting of moving images Description of Progressive Scan CCDPRO Snapshot Recording Advanced FeaturesPRO Snapshot Mode Selection Pro SnapshotProgressive Mode Motor Drive ModeTo Remove The Shutter Sound Take Snapshot If the Power Switch is set toSnapshot Flash Auto Flash Engage RECORD-STANDBYAdjust Brightness of Flash Flash Brightness AdjustmentAccess Manual Mode Item Menu Access Flash AdjustmentUsing Menu For Detailed Adjustment Recording Menu Explanations Factory-presetSystem Menu Explanations Date/Time Menu ExplanationsEffect Selection Fade/Wipe EffectsFADE/WIPE Selection If you select Picture Wipe/Dissolve during recording Store Scene in Memory Engage the Record-Standby modePicture Wipe or Dissolve Selection Before the following steps, perform steps 1 through 4 on pgMenu Fader And Wipe MenuDisable Mode Select ModeProgram AE With Special Effects Sepia ShutterClassic Film TwilightAuto Focus FocusingPatterns that are regularly repeated Manual Focus Access Manual FocusAdjust Focus END Adjustment of FocusTo darken the image Access Exposure ControlIf you want to reset the exposure, repeat step Exposure ControlTo Lock The Exposure Control And The Iris Center SUBJECT, Lock IrisIris To Return To Automatic Iris ControlSelect Auto in . Or set the Power Switch to White Balance AdjustmentAccessment White Balance Adjust When using a video light or other similar type of lightingSET Manual White Balance Enter SettingAdjustment Manual White Balance OperationEngage High Speed Recording Standby High Speed RecordingEND Recording Play Back Adjust VolumePlayback Basic Playback Rewind or Fast-forward the tapeBasic Playback Find Scene of Interest Progressive Slow-Motion PlaybackEND Playback Close Menu Playback MenuPlayback Menu allows you to set the following functions Displaying The Time Code During Playback Playback SoundRecording sound Display Output sound Use the provided and Audio/Video cable When connecting the cables, open this coverBasic Connections Use the provided S-Video cable and Audio/Video cableTurn on the camcorder, the VCR and the TV Connectinput VCR Output to TV Supply PowerPower Switch back to Connectvcr Camcorder to TV orConnect Camcorder to PC Turn on PowerConnect Printer to PC if Necessary Connection To a Video Unit Equipped With a DV ConnectorTape Dubbing Press Play 4 to play back the source tape Digital DubbingMake Connections Start PlaybackRE-INSERT Holder Installing The BatteryPull OUT Battery Holder Insert Battery in HolderFunctions Buttons $ #Using the Remote Control Unit EN59 Operate VCR Random Assemble Editing R.A.EditSET REMOTE/VCR Code SET Remote to Operate VCRSelect Scenes Make ConnectionsUSE FADE/WIPE on Scene Transition if Necessary Select ScenesSET EDIT-IN Point SET EDIT-OUT PointPrepare Source Tape Automatic Editing to VCRStop Editing Choose a Scene For More Accurate EditingDiagnosing VCR’S Against Camcorder Timing Prepare for R.A. EditAccess Playback Menu Adjustment of VCR’S Against Camcorder TimingInput Correction Data Stop Dubbing Audio DubbingBegin Dubbing Pause During DubbingPrepare for Insert Editing Insert EditingFind Edit OUT Point Find Edit in PointCorrective Action TroubleshootingEN69 Troubleshooting EN71 Corrective Action EN TroubleshootingAfter Use User Maintenance74EN Control VOL # Date/Time Reset Button ResetTally Lamp Power Lamp Red-Eye Reduction Button444 LCD Monitor/Viewfinder Indications During RecordingIndications FunctionIndications Function LCD Monitor/Viewfinder Indications During PlaybackPg , 50 Monotone Motor Drive ModeSound Mode Pg , 9To avoid hazard Temperature Range SpecificationsTo prolong service life Plug adapterDo not leave the unit For safety, do notAvoid using the unit Dirty heads can cause the following problemsTelephone Number Declaration of Conformity Model NumberTrade Name AddressGeneral AC Power Adapter/Charger AA-V68UConnectors CamcorderMemo EN83 GR-DVL9500

LYT0291-001B specifications

The JVC LYT0291-001B is a versatile and innovative camcorder that stands out in the realm of consumer and professional video recording. Designed with advanced features and cutting-edge technologies, it caters to both amateur filmmakers and seasoned videographers looking for quality and functionality in their recording equipment.

One of the standout features of the LYT0291-001B is its high-definition video recording capability. It supports 4K resolution, providing stunning visual clarity and detail that allows users to capture life’s moments in exceptional quality. This feature is complemented by a sophisticated lens system that incorporates various optical technologies to enhance image quality, minimize distortion, and improve low-light performance.

The camcorder is equipped with advanced stabilization technology, which plays a crucial role in creating smooth and stable footage, even in dynamic shooting situations. This is particularly beneficial for capturing action-packed scenes or while on the move, as it helps eliminate the shake commonly found in handheld video recording.

Another notable characteristic of the LYT0291-001B is its user-friendly interface. With intuitive controls and customizable settings, users can easily navigate through different recording modes, including manual and automatic options. This flexibility allows for creative freedom, enabling filmmakers to tailor their shooting experience according to their specific needs.

The camcorder also features robust connectivity options, including Wi-Fi and HDMI outputs. This makes it easy to transfer files to other devices or to live-stream content, a capability that is increasingly important in today's interconnected world. Additionally, the LYT0291-001B supports various media formats, providing versatility in post-production editing.

In terms of design, JVC has kept ergonomics in mind, ensuring that the LYT0291-001B is comfortable to hold during extended shooting sessions. Its lightweight body and compact size make it a convenient option for on-the-go videography, while its durable construction ensures it can withstand the rigors of everyday use.

Overall, the JVC LYT0291-001B is a feature-rich camcorder that combines quality, ease of use, and innovative technology. Whether you're capturing family gatherings, outdoor adventures, or professional projects, this camcorder promises to deliver exceptional video results that meet the demands of a modern videographer. With its impressive capabilities, it positions itself as a formidable choice in the competitive camcorder market.
Top Page Image Contents