USER
MAINTENANCE
After Use
EN73
Remove.
OPEN/EJECT Switch
PUSH HERE
1
2 Slide OPEN/EJECT in the direction of the arrow, then
swing the cover open until it locks. The cassette holder opens automatically. Remove the cassette.
3 Press “PUSH HERE” to close the cassette cover.
4 Press the Battery Release Button and remove the battery pack.
Battery Release | |
| Button |
4 
Cleaning The Camcorder
1 CLEAN EXTERIOR Wipe gently with a soft cloth.
•Put cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth.
2 CLEAN LCD MONITOR
Press
3 CLEAN LENS
Blow it with a blower brush, then wipe gently with lens cleaning paper.
5 | 6 | 7 |
|
| Cover |
|
| Blower brush |
4 PULL OUT VIEWFINDER FULLY
5 TILT VIEWFINDER VERTICALLY Tilt the viewfinder upward to 90 degrees.
6 OPEN COVER
Open the cover located on the bottom of the viewfinder.
7 CLEAN VIEWFINDER Remove dust using a blower brush.
8 PUSH VIEWFINDER BACK IN Close the cover until it locks in place. Tilt the viewfinder horizontally, and push it back in.
NOTES:
●Avoid using strong cleaning agents such as benzine or alcohol.
●Cleaning should be done only after the battery pack has been removed or other power units have been disconnected.
●Mold may form if the lens is left dirty.
●When using a cleaner or chemically treated cloth refer to the cautions of each product.