JVC LYT0085-001A manual Retake R/F, Feature, Quick Review, Purpose, Operation

P. STABILIZER

RETAKE (R/F)

		EN	15
FEATURE:	Quick Review
PURPOSE:	To check the end of the last
	recording.
OPERATION:	1) Press “ ” and release quickly
	during the Record-Standby mode.

■Tape is rewound for about 2 seconds and played back automatically, then pauses in Record-Standby mode for the next shot.

NOTE:	Distortion may occur at start of
	playback. This is normal.
FEATURE:	Retake
PURPOSE:	To re-record certain segments.
OPERATION:	1) Make sure the camcorder is in the
	Record-Standby mode.
	2) Press either RETAKE button to
	reach the start point for new
	recording. Pressing “F” forwards
	the tape and pressing “R” reverses
	it.
	3) Press Recording Start/Stop Button
	to start recording.
NOTE:	Noise may appear during Retake.
	This is normal.
FEATURE:	Picture Stabiliser
PURPOSE:	To compensate for unstable images
	caused by camera-shake, particularly
	at high magnification.
OPERATION:	1) Press P. STABILIZER. “ ”appears.
	■ To switch off the Picture
	Stabiliser, press P. STABILIZER.
	The indicator disappears.
NOTES:	● Accurate stabilisation may not be
	possible if hand shake is excessive,
	or under the following conditions:
	• When shooting subjects with
	vertical or horizontal stripes.
	• When shooting dark or dim
	subjects.
	• When shooting subjects with
	excessive backlighting.
	• When shooting scenes with
	movement in various directions.
	• When shooting scenes with low-
	contrast backgrounds.
	● Switch off the Picture Stabiliser
	when recording with the
	camcorder on a tripod.