JVC LYT0085-001A manual Fade/Wipe, Advanced Features, Engage FADE- or Wipe Standby Mode

20EN

[Ex. : Fader]

RECORDING

Fade/Wipe

AdvancedFeatures(cont.)

Fade-in

Fade-out

Function indication

Viewfinder

4EFFECT

MOSAIC

After 2 sec.

BK	BK FADER
		MOSAIC
		SHUTTER
		SLIDE
OFF	OFF
(No indication)

These effects let you make pro-style scene transitions. Fade- or wipe-in works at recording start, and fade- or wipe-out works at recording end or when you enter Record-Standby mode.

ENGAGE FADE- OR WIPE-

STANDBY MODE

1 Press EFFECT to cycle through the modes as shown to the left. Once the desired mode appears, it is selected and reserved.

•The selected mode’s name and its indication are displayed for approx. 2 seconds. Then the name disappears, and only the indication remains.

START OR END RECORDING

2 Press Recording Start/Stop Button to activate fade-in/ out or wipe-in/out.

TO CANCEL FADE- OR WIPE- STANDBY MODE

3 Press EFFECT repeatedly until “OFF” appears.

•“OFF” is displayed for approx. 2 seconds and the fade/wipe-standby mode is cancelled.

BK FADER

Fades in/out to a black screen.

EFFECT

Recording

Start/Stop

Button

MOSAIC (Fader)

Gradually turns/returns the picture into/from a mosaic pattern.

SHUTTER (Wipe)

A black screen moves in from the top and bottom, closing over the image like a shutter, or a new image pushes open the black screen vertically from the centre.

SLIDE (Wipe)

A black screen moves in from the left to gradually cover the image, or a new image moves in from right to left.

NOTES:

●Pressing and holding the Recording Start/Stop Button allows you to record a black blank screen or a mosaic pattern if Mosaic Fader is selected.

●The screen becomes slightly reddish when the Fade/ Wipe is used with Sepia (☞ pg. 19).

●With the Electronic fog filter mode (☞ pg. 19) engaged, when Fader (not Mosaic) is used, the image fades in/out to a white screen.