28
MENU
RECORDINGAdvancedFeatures(cont.)
Using Menu For Detailed Adjustment
+
FAR |
|
|
|
| NEAR | |
|
| |||||
|
|
|
|
| – | |
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Gain Up | NORM | ||||
| Tele Macro | OFF |
| |||
| Interval Timer | OFF | ||||
| Rec Time | OFF | ||||
| JLIP ID NO . | 07 |
| |||
| Tally | ON | ||||
| Set Character |
|
| |||
| Date/Time |
|
| |||
| END :MENU KEY | |||||
|
|
|
|
|
|
|
| Gain Up | OFF | ||||
| Tele Macro | ON |
| |||
| Interval Timer | 1min |
| |||
| Rec Time | 1/2s | ||||
| JLIP ID NO . | 07 |
| |||
| Tally | ON | ||||
| Set Character |
|
| |||
| Date/Time |
|
|
END :MENU KEY
PAUSE
If “Gain Up” or “Tele Macro” in the Menu has been changed from the factory settings, this mark appears in the viewfinder.
This camcorder is equipped with Program Manager, an
SELECT MODE
1 Turn the PROGRAM AE select dial to any position except AUTO LOCK.
ACCESS MENU SCREEN
2 Press MENU.
SELECT FUNCTION
3 Press + or – to place the highlight bar on the desired function.
MAKE SETTING
4 The setting procedure depends on the function you select.
If you select Gain Up, Tele Macro, Interval Timer, Rec Time, JLIP ID NO or Tally. . . .
.... press FAR or NEAR to cycle through the choices
until the desired setting appears.
If you select Set Character or Date/Time, . . .
.... press NEAR to access the selection menu for
each function (Set Character – ☞ pg. 25; Date/ Time – ☞ pg. 9).
CLOSE MENU
5 Press MENU. The normal screen reappears.
NOTE:
The menu is available only in the