JVC 0597TOV*UN*VP Power switch, To Audio and Video connectors, To Audio Video Connectors

NOTES:

Press PLAY on the camcorder and engage the VCR’s Record mode.

STOP EDITING TEMPORARILY

Engage the VCR’s Record-Pause mode and press PAUSE on the camcorder.

EDIT MORE SEGMENTS

Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder when finished.

5

6

7

START EDITING

FIND EDIT-IN POINT

Engage the VCR’s AUX and Record-Pause modes.

3

4 Engage the camcorder’s Play mode to find a spot just before the edit-in point. Once it’s reached, press PAUSE on the camcorder.

Tape Dubbing

CONNECT EQUIPMENT

1 Following the illustration at left, connect the camcorder and the VCR. (refer also to page 32 and 33)

PREPARE FOR DUBBING

2 Set the camcorder’s Power switch to “PLAY”, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR.

SELECT VCR MODE

EDITING 37

PLAY/PAUSE

Power switch

To AUDIO and VIDEO connectors

A/V cable (optional)

To AUDIO,

VIDEO and

S -IN connectors

If your VCR has the SCART connector, use the provided cable adapter.

To S -VIDEO connector

S-VIDEO cable (optional)

“Y/C”/”CVBS” video out select switch

● If your VCR has an S-VIDEO input connector or a

SCART connector compatible with Y/C signals, connect

the camcorder and the VCR using the S-VIDEO cable.

This can improve the dubbed picture quality.

● If you use the provided cable adapter, set the “Y/C”/

VCR (Recording deck)

“CVBS” video out select switch as required.

Y/C : When connecting to a VCR which accepts Y/C signals and uses an S-VIDEO cable.

CVBS : When connecting to a VCR which does not accept Y/C signals and uses an audio/video cable.