JVC LYT0002-0S4A manual Safety Precautions

Page 3

SAFETY PRECAUTIONS

Do not point the lens or the viewfinder directly into the sun. This can cause eye injuries, as well as lead to the malfunctioning of internal circuitry. There is also a risk of fire or electric shock.

CAUTION! The following notes concern possible physical damage to the camcorder and to the user.

When carrying, be sure to always attach and use the provided hand strap. Hold the camcorder firmly in your hand, with the strap securely around your wrist. Carrying or holding the camcorder by the viewfinder and/or the LCD monitor can result in dropping the unit, or in a malfunction.

Take care not to get your finger caught in the cassette cover. Do not let children operate the camcorder, as they are particularly susceptible to this type of injury.

Do not use a tripod on unsteady or unlevel surfaces. It could tip over, causing serious damage to the camcorder.

CAUTION! Attaching the camcorder to the Docking Station, connecting cables (AUDIO/VIDEO, S-VIDEO, Editing, DC) and leaving the unit on top of the TV is not recommended, as tripping on the cables will cause the camcorder to fall, resulting in damage.

This camcorder is designed exclusively for

the digital video cassette. Only

cassettes marked can be used with this unit.

Before recording an important scene . . .

..... make sure you only use cassettes with the Mini

DV mark.

..... remember that this camcorder is not compatible

with other digital video formats.

..... remember that the this camcorder is intended

for private consumer use only. Any commercial use without proper permission is prohibited. (Even if you record an event such as a show, performance or exhibition for personal enjoyment, it is strongly recommended that you obtain permission beforehand.)

EN 3

About Batteries

DANGER! Do not attempt to take the batteries apart, or expose them to flame or excessive heat, as there is a risk of fire or explosion.

WARNING! Do not allow the battery terminals, or the battery itself, to come in contact with metals, as this can result in a short circuit and possibly start a fire.

•When transporting, make sure the provided battery cap is attached to the battery. If you misplace the battery cap, carry the battery in a plastic bag.

The Benefits Of Lithium-Ion Batteries

Lithium-ion battery packs are small but possess a large power capacity. However, when the battery pack becomes cool in an environment subject to cold temperatures (below 10°C/50°F), the battery pack has a characteristic that its usage time becomes shorter and may cease to function. If this happens, place the battery pack in your pocket or other warm, protected place for a short time, then re-attach it to the camcorder. As long as the battery pack itself is not cold, it should not affect perform- ance.

(If you’re using some kind of heating pad, make sure the battery pack does not come in direct contact with the pad.)

Lithium-ion is vulnerable in colder temperatures.

Image 3
Contents GR-DVX PRO It is recommended that you Dear CustomerSafety Precautions DC cord EN P Rovided a CCE SsoriesCD-ROM Sub-Code Area Video Area Audio AreaITI Insert and Tracking Information Area Contents Detach Charging The Battery PackDetach BATTERY/BATTERIES AttachClose Battery Cover Installing The Battery PackOpen Battery Cover Insert BatteryKnob and insert Supply PowerFirst. Close the battery cover Attach to CamcorderLCD monitor Date/Time SettingsSelect Operation Mode Input Date and TimeINSERT/REMOVE Tape OPEN/EJECT switchLoading/Unloading a Cassette Open Cassette CoverRecording Mode Setting SET Recording ModeSet depending on your preference During transporting Attach Hand StrapPUT Camcorder Close FlapAttach Grip Strap to Hand Strap Eyelet Adjust LengthGrip Strap Attachment Tripod MountingDioptre Adjustment Adjust DioptreTurn on Camcorder Insert Battery in Holder Remote Control UnitInstalling The Battery Pull OUT Battery HolderPower Dial Position Function Operation ModeStop Recording Basic RecordingPull OUT Viewfinder or Open LCD Monitor Start RecordingEngage Still Mode Recording From The Middle Of a TapeStart Search During shooting When blank portion is recorded on a tapeTime Code Proper recordingBrightness indication appears in the LCD monitor Tape Remaining IndicatorAdjust Brightness Brightness ControlTilt LCD Monitor Journalistic shootingInterface Shooting Open LCD MonitorZoom RE COR DIN GTake Snapshot Motor Drive modeChanging the Snapshot Setting SnapshotSelect Function Snapshot Flash Auto FlashAccess Flash Adjustment Adjusting Flash BrightnessSelect Mode Accessmenu Manual Mode ItemScene 5-second recording Engage 5S ModeDissolves during 5 second mode recording To Take a Snapshot In The 5-Second ModeTo Take a Snapshot In The Self-Timer Mode Self-TimerStop SELF-TIMER Recording END SELF-TIMER RecordingPlease refer to page 31, 32 for details MenusClose Recording Menu Recording Menu allows you to set these functionsWide Mode REC Mode Recording modeZoom Zoom magnification DIS Digital Image StabilizerFlash pg Displaying The Date And Time During Recording Access System Menu System MenuClose System Menu Return Sound signals can be sampled at 32 kHz or 48 kHzSelect Effect Access FADER/WIPE MenuTo Cancel FADE/WIPE Effects FADE/WIPE EffectsFader White Fades and WipesExample WH ExamplePicture Wipe/Dissolve Resume RecordingP and P of the Fader/Wipe Menu Random Variations Fade in or out with a full-screen mosaic effect Fade in or out with a white screenFade in or out with a black screen Fade out from colour to black and whiteRight corner to the lower left corner New scene gradually appears as the old one graduallyDisappears New scene wipes in over the previous one from the upperAE/Effects Disable P.AE/EFFECTSepia Classic FilmStrobe TwilightTo Change To Auto Focus Manual Focus AdjustmentAccess Manual Focus Adjust FocusTo Return To Automatic Exposure Control Adjust ExposureExposure Control Brightness control of the LCD monitorIris After , adjust the exposure rotatingIris Lock To Return To Automatic Iris ControlSelect Auto in . Or set the Power Dial to White Balance AdjustmentAccessment White Balance Adjust Closement White Balance AdjustTo Change The Tint For Recording Enter SettingExit Manual White Balance Adjustment Manual White Balance OperationEND Playback Volume switchRewind Tape Viewing RecordingEND Zoom Playback ZoomActivate Zoom Locatescene Portion of MagnifiedStart Playback Press the Play button Playback EffectsSelect P.AE/EFFECT RM-V711UPlayback Menu allows you to set the following functions Access Playback MenuPlayback Menu Close MenuPlayback Sound Displaying the Date During PlaybackDisplaying The Time Code During Playback Turn the Power Dial to Play and turn on the TV/VCR VCR/TV Connection when connecting directly to the camcorderTurn on Power Select TV’S Video ModeAttach and Locks VCR/TV Connection using Docking StationEquipped with a Scart VCR/TV connection using the Docking StationWith regular video signal SignalConnect Docking Station to TV or VCR Connection to a TV or VCREquipped with an S-VIDEO And/or A/V input RCAVCR Recording deck DubbingMake Connections Start Playback Pause RecordingBrand Setting Operate the VCR VCR Code ListRM-V711U 9 ` provided Execute FADE/WIPE in if Necessary Random Assemble EditingMake Connections Start Source PlaybackUSE P.AE/EFFECT if Necessary SET EDIT-IN PointSET EDIT-OUT Point USE Fade Wipe on Scene Transition if NecessaryEngagemode Vcrs RECORD-PAUSE Start EditingStop Editing Choose a Scene For More Accurate EditingDiagnosing VCR’s against Camcorder Timing Prepare for R.A. Edit Play Back Dubbed ScenePress MENU. The Playback Menu appears on the TV screen Input Correction DataPause During Dubbing Audio DubbingFind EDIT-IN Point Begin DubbingPause During Editing Insert EditingFind Edit OUT Point Find Edit in PointReplace with new cassette Battery pg5S or Tape END appearsEN TR Ouble Shooting Picture Wipe function doesn’t work Squeeze or Cinema mode is selected in the Recording MenuEnd of its service life, images Same time Cleaning The Camcorder Camcorder IND.ON/OFF button pg OPEN/EJECT switch pgPower dial pg RBATTERY cover pg$EDIT jack pg Release button pg Lock lever pg Multi connector pg@ Charger Indicator Charge pg #Remote control sensor pg Jlip jack Joint Level Interface ProtocolBrightness of the flash LCD Monitor/Viewfinder Indications During RecordingFunction Appears during recording Appears while the tape is runningLCD Monitor/Viewfinder Indications During Playback Indications Function To prevent damage to the camcorder For safety, do notAvoid using the unit To avoid hazardTo prevent damage to the LCD monitor, do not To prolong service lifeDo not leave the unit To protect the unit, do notVideo signal recording format PowerPower consumption Signal formatOn-screen display Colour temperatureAC Adapter Auto focusAnimation Audio Dubbing Second Mode Fade-In/OutLithium Battery Pg , 3 Motor Drive ModeGR-DVX PRO