JVC GZMS120RUS, LYT1994-001B-M Other Setting, Using an SD Card, Close the SD card cover

Page 18

Other Setting

Using an SD Card

If you want to record to an SD card, the following operations need to be performed.

Operations are confirmed on the following SD cards. Class 4 or higher compatible SD or SDHC card Panasonic, TOSHIBA, SanDisk, ATP SD card (256 MB to 2 GB) or SDHC card (4 GB to 32 GB).

If other media are used, they may fail to record data correctly, or they may lose data that had already been recorded.

MultiMediaCards are not supported.

Cards used to record video on this camcorder cannot be played back on other devices.

Some card readers (including internal card readers in PCs) may not be able to support SDHC format. If you use an SDHC card for recording and encounter any reading error, the card reader you are using, might be a non-SDHC supported device. Please use the camcorder or other SDHC compatible devices to access the card.

QInsert an SD card

Preparation:

Press Power () button to turn off the camcorder.

1 Open the SD card cover.

2 Firmly insert the card with its clipped edge first.

Clipped Edge

3 Close the SD card cover.

LTo remove an SD card Push the SD card once.

After the card comes out a little, pull it out.

NOTE

Insert and remove the SD card only while the power is turned off. Otherwise, data on the card may be corrupted.

Do not touch the terminal on the reverse side of the label.

RChange the recording medium

The camcorder is programmed to record on SLOT A when it is shipped from the factory. You can change the recording medium to

SLOT B.

Set [VIDEO SLOT SELECTION] and [IMAGE SLOT SELECTION] to [SLOT A] or [SLOT B].

 

 

MEDIA SETTING

 

 

 

 

 

SCENE SELECT

 

 

1

 

 

 

,

FOCUS

 

SLOT A

@

 

 

 

ADJUST SLOTBRIGHTNESS

@

 

 

 

 

SHUTTER SPEED

 

@

 

 

 

SET

 

 

 

QUIT

 

 

 

 

 

 

 

 

 

 

INFORMATION

1.Recording media switches automatically from Slot A to Slot B and vice versa after the card in the selected slot is full.

2.You can select Slot A or Slot B manually as recording media for video and still image respectivety.

SFormat an SD card when using it for the first time

Select [FORMAT SD CARD] to format the card.

MEDIA SETTING

VIDEO SLOT SELECTION

IMAGE SLOT SELECTION

,FORMAT SD CARD

ERASE ALL DATA

 

SET

QUIT

18

Image 18
Contents Model No Serial No Número de modelo Número de serieFor USA-California Only Safety PrecautionsSerial number plate is on the battery pack mount Special handling may applyCart/apparatus combination to avoid injury from tip-over TrademarksAccess lamp Easy Start Guide Charge the Battery Before RecordingGrip Adjustment Power/charge lamp blinks ChargingSlide your finger up and down on the sensor. Then touch OK Date/Time SettingPower button LCD monitor Select on if daylight saving time is effectivePress the START/STOP button to start recording Video RecordingRemaining space on the SD Card Video Quality Press it again to stopIndex screen Mode changes when you press the buttonPlaying Back Playback screenContents Precautions on handling batteries When Using an SD CardReset the camcorder if it does not operate correctly Read This FirstAccessories Attaching the Core FilterTripod Mounting Index Direct DVD Button p Info Button p + SD Card Slot Export Button p AV Connector pCamcorder START/STOP Button p / Snapshot Button pIndications on LCD Monitor Shooting Indicator p Event IndicatorSelf-Timer Indicator During Still Image Recording OnlyDuring Video Playback During Still Image Playback Fine Normal EconomyDate/Time Setting Necessary Settings before UseCharging the Battery Pack Select Clock AdjustLanguage Setting Close the SD card cover Other SettingUsing an SD Card Select Format SD Card to format the cardRecording Files Slide the mode switch to select Video modePress PLAY/REC to select recording mode Video RecordingStill Image Recording Slide the mode switch to select# still image mode Recording mode Press and hold Snapshot halfwayZooming Checking the Remaining BatteryPower LED LightVideo Playback Press PLAY/REC to select the playback modePlaying Back Files Select the desired file# still image mode Playback mode Still Image PlaybackManual Recording Changing to Manual Recording ModeManual Setting in Menu Backlight CompensationViewing Files on TV Connection with TVPlayback Operation Managing Files Capturing a Still Image from a VideoDeleting Files Connection with a DVD Burner Preparation Using a DVD BurnerCopying Files Turn on the camcorder first, then turn on the DVD burnerSelect YES or no Select Create from ALLSelect the desired disc number Select ExecuteInstalling the software to the PC Creating a DVD using a PCClick Easy Installation Click Next Click FinishClick Start Click All volume in camcorder and click NextMaking Backup on the PC Preparation LTo disconnect the camcorder fromMaking User Lists to Arrange the Files Make backup on the PCDrag the file and drop into the user list Files recorded on the day are displayedCopying Files to a DVD Preparation Folder Structure and Extensions Customer Support InformationRegion Language Phone # Play back playlists on the camcorder To connect using the AV connectors analog dubbingDubbing Files to a VCR/DVD Recorder Create a playlist Turn off all unitsChanging the Export Setting Using with a Portable Media PlayerTurning on the Export Mode Transferring the Files to PCUploading Files Turning on the Upload ModeUploading Files to Websites Press Upload twiceTouch Menu Select the desired menu Changing the Menu SettingsTroubleshooting Trouble ActionRecording Playback Other problems LTo reset the camcorder when it does not operate normallyTrouble Indication Action Specifications Required charging/recording time approx Hr hour/min minute Hr hour/min minuteApproximate number of storable images for still image Approximate recording time for videoAC Adapter Battery PackWhen using the AC adapter in areas other than the USA Recording Medium SD CardMain Unit Declaration of ConformityTerms CD-ROMMemo Precauciones de seguridad Sólo para EE.UU.-CaliforniaEl enchufe de red siempre debe estar fácilmente disponible Si este símbolo aparece, sólo es válido en la Unión Europea Marcas comercialesLuz de alimentación/carga Guía de Inicio Rápido Cargue la batería antes de grabarLuz de acceso Adaptador de CA a la toma de CA de 110 V a 240Ajuste de la fecha/hora Seleccione on si el horario de verano está activadoBotón de alimentación Pantalla LCD Grabación Grabación de vídeoEl modo cambia al pulsar el botón Aparece el indicador de grabación automáticaPantalla de índice Reproducción¡No olvide realizar copias tras la grabación Pantalla de reproducciónVisualización de archivos en un Cambio de las configuraciones deContenido Utilización con un reproductorReinicie la videocámara si no funciona correctamente Cómo utilizar el sensor táctilRealice una grabación de prueba Precauciones sobre el uso de bateríasAdaptador de CA AccesoriosColocar el Filtro de Núcleo Cable USBInstalación en trípode Parte inferior de la videocámaraÍndice Botón PLAY/REC p , 20, 22, 23 Interruptor de modo !, # VideocámaraSensor táctil p # Botón OK $ Botón Menu Botón Direct DVD p Botón Info pIndicador de revisión rápida p Indicaciones en la pantalla LCDSólo durante la grabación de imágenes fijas Indicador de control de brilloContador Durante la reproducción de vídeoDurante la reproducción de imágenes fijas Modo de reproducción F Reproducción Q PausaAjuste de la fecha/hora Ajustes preliminares necesariosCarga de la batería Toque MenuToque Menu Seleccione CONFIG. Pantalla Ajuste del idiomaInserte firmemente la tarjeta por su lado recortado Otros ajustesUso de una tarjeta SD Cierre la tapa de la tarjeta SDVídeo Grabación de archivosGrabación de vídeo Pulse START/STOP para empezar la grabaciónGrabación de archivos continuación Grabación de imágenes fijasImagen fija Comprobación de la carga restante ZoomLuz LED De la bateríaDeslice el interruptor de modo Reproducción de archivosReproducción de vídeo Para seleccionar el modo El modo de reproducción VídeoPulse PLAY/REC para seleccionar el modo de reproducción Reproducción de imágenes fijasSeleccione el archivo que desee Para eliminar una imagen fija SeleccioneCompensación de contraluz Grabación manualCambio al modo de grabación manual Ajuste manual en el menúConexión con el televisor Visualización de archivos en un televisorOperación de reproducción Una vez realizada la conexión con elGestión de archivos Captura de una imagen fija de un vídeoEliminación de archivos Grabadora de vídeo o de Copia de archivosUso de una grabadora de DVD Conexión con una grabadora de DVD PreparativosSeleccione SÍ o no Copia de archivos continuaciónSeleccione SELECC. Entre Todo Seleccione EjecutarHaga clic en Sigviente Haga clic en Finalizar Haga clic en Easy InstallationCreación de un DVD mediante un PC Instalación de software en el PCHaga clic en Comienzo Haga clic en Todo el volumen en la videocamara y en ProximoSeleccione Hacer Copia DE Copia de seguridad en un PCSe muestran los archivos grabados en esa fecha GrabaciónArrastre y suelte los archivos en la lista personalizada Realice una copia de seguridad en el PCCopia de archivos en DVD Preparativos = número Estructura de carpetas y extensionesInformación de asistencia al cliente Región Idioma Nº de teléfonoPara detener la copia Copia de archivos en una grabadora de vídeo/DVDReproduzca las listas de reproducción en la videocámara Para ocultar la fecha o los iconos de la pantallaTransferencia de los archivos al PC Utilización con un reproductor multimedia portátilActivación del modo de exportación Cambio del ajuste de exportaciónPulse Upload dos veces Carga de archivos a sitios WebActivación del modo de carga Carga de archivos LNo puedo publicar el archivo en YouTubeProblema Acción Cambio de las configuraciones de menúsSolución de problemas Toque Menu Seleccione el menú que deseeSolución de problemas Continuación Grabación Reproducció Otros problemasIndicaciones de advertencia Indicación AcciónEspecificaciones Calidad Soporte deGrabación Tamaño de 256 MB 512 MB 16 GB 32 GB Imagen/Calidad 832 xBaterías PrecaucionesAdaptador de CA Soporte de grabación Tarjeta SDEquipo principal Términos Victor Company of Japan, Limited