Action
• SD card is full. Delete unnecessary files or replace the SD card.
• Insert a commercially available SD card, and set each of the [VIDEO SLOT SELECTION] and [IMAGE SLOT SELECTION] to [SLOT A] or [SLOT B].
• Recording stops automatically after 12 hours of non-stop recording. To ensure continuous recording, set [AUTO SWITCH REC MEDIA] to [ON] before you start recording.
• Sometimes playback is interrupted at the connecting section between two scenes. This is not a malfunction.
• Select [PLAYBACK MPG FILE] then search the video on the index screen.
(Video files that have damaged management information can be played back.)
• Cancel group display and date search functions.
• Change the setting in [VIDEO SLOT SELECTION] or [IMAGE SLOT SELECTION]. (Files on other media are not displayed.)
• If there are many files (such as video) in the camcorder, it takes time for the camcorder to respond. It is recommended that you copy all files from the camcorder onto your computer, and erase the files from the camcorder.
• Check the remaining battery pack charge.
(When the battery pack is fully charged, the lamp does not flash.)
• When recharging in either a hot or cold environment, ensure that battery is being charged within the permitted temperature range. (If the battery pack is being recharged outside the permitted temperature range, recharging may stop to protect the battery pack.)
• You need your YouTube™ account to upload files to YouTube™. Create your account.
• Refer to “Q&A”, “Latest Information”, “Download Information”, etc. in [Click for Latest Product Info] in the help of the provided Everio MediaBrowser software.
• Refer to “Q&A”, “Latest Information”, “Download Information”, etc. in [Click for Latest Product Info] in the help of the provided Everio MediaBrowser software.
Troubleshooting (Continued)
Recording Playback
Other problems
Trouble
Recording cannot be performed.
Recording stops by itself.
Sound or video are interrupted.
Cannot find a recorded video.
The camcorder operates slowly when switching between video mode and still image mode, or when switching the power on or off.
The lamp does not flash during battery pack charging.
Cannot upload the file to YouTube™.
Cannot export the file to iTunes®.
LTo reset the camcorder when it does not operate normally
! Close the LCD monitor and remove the power supply (battery pack or AC adapter) from the camcorder, then reattach it.
# Execute [FACTORY PRESET].
38