JVC ENLYT1127-001A manual Connection To a Personal Computer, Using USB cable, Using DV cable

Page 44

Connection To A Personal Computer

[A] Using USB cable

It is possible to do the following things:

●Transfer still/moving images stored on a memory card to a PC.

●Transfer still/moving images recorded on a tape to a PC.

●Capture still/moving images in real-time.

●Use this camcorder as a WebCam.

[B] Using DV cable

It is also possible to transfer still/moving images to a PC with a DV connector by using the provided software, software equipped with the PC or commercially available software.

NOTES:

●Refer to “SOFTWARE INSTALLATION AND USB CONNECTION GUIDE” for the installation of the bundled software and drivers.

●It is recommended to use the AC Adapter as the power supply instead of the battery pack ( pg. 7).

●Never connect the USB cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.

●If the PC connected to the camcorder via the USB cable is not powered, the camcorder does not enter the USB mode.

●The date/time information cannot be captured into the PC.

●Use the provided software PIXELA ImageMixer to capture video in real-time.

●You can also use the camcorder for webconference by using Windows® Microsoft Netmeeting and signing up for Microsoft Hotmail.

●Refer to the instruction manuals of the PC and Software.

●The still images can also be transferred to a PC with a DV connector-equipped capture board.

●When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depend- ing on the type of DV connector (4 or 6 pins) on the PC.

●The system may not work properly depending on the PC or capture board you are using.

●When using the DV connection refer to manufacturer instructions of your capture board for driver’s installation and operation instructions.

“ACCESSING FILES” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC.

NEVER disconnect the USB cable while “ACCESSING FILES” is displayed on the LCD monitor since this can result in product damage.

[A] Using USB cable

[B] Using DV cable

Connector cover*

To USB (

 

To DV )

 

 

Core filter

USB cable

OR

DV cable

(provided)

(optional)

 

 

Core filter

To USB

 

To DV

connector

 

connector

PC

PC with DV connector

*When connecting cables, open this cover.

EN

44 SYSTEM CONNECTIONS

Page 43 Page 45
Image 44
Page 43 Page 45
Contents GR-DX300 GR-DX95 GR-DX75 Contents Safety Precautions Before recording an important scene Remote Control Unit RM-V717U Tab AAA R03 Video/Editing CableAC Adapter’s cord pg For attachmentSub Menu Release the stoppers on both ends of the Core FilterStopper Power Charging the Battery PackUsing the Battery Pack Using AC PowerGrip Adjustment Viewfinder AdjustmentLithium-ion is vulnerable in colder temperatures About BatteriesLoading/Unloading a Cassette Approximate recording time Tape Recording modeTripod Mounting Press + or 5 to select Camera and press SELECT/SET Date/Time SettingsRecording Mode Setting Loading a Memory Card Picture Quality/Image Size Setting To select the desired mode and press SELECT/SETTo Unload a Memory Card Press + or 5 to select DSC and press SELECT/SETTo Adjust The Brightness Of The Display Shooting while using the LCD monitor OpenShooting while using the viewfinder Pull out Basic RecordingOperation Mode Power-Linked OperationJournalistic Shooting Self-RecordingTo Control The Speaker Volume Time CodeRecording from the Middle of a Tape Normal PlaybackTo cancel Blank Search midway Blank SearchPress Blank Search r PressTo TV or VCR If using a VCR . . . go to step If not . . . go to stepConnections Basic Shooting Snapshot To Delete Unwanted Still ImagesTo Remove The Shutter Sound To Protect Valuable Files available only for SD Memory CardTo Adjust The Brightness Of The Display See ÒTo Adjust The Brightness Of The DisplayÓ onApproximate Number of Storable Images GR-DX95/DX75Viewing File Information Auto PlaybackIndex Playback Removing On-Screen DisplayTo Remove Protection Advanced FeaturesProtecting Files Deleting Files Navigation Function To Make Thumbnail Images During Tape RecordingTo ADD Thumbnail Images During Tape Playback To Delete Thumbnail ImagesTo cancel E-Mail Clip Recording Mail Clip RecordingTo Make Video Clips from REAL-TIME Camera Image To Make Video Clips from Recorded Video FootageSetting Print Information Dpof Setting To Reset The SettingDubbing Still Images Recorded On a Tape To a Memory Card To Print ALL Still Images ONE Print for EachTo Reset The No. Of Prints Initialising a Memory CardMaking a New Folder Folder and File namesFlash Brightness Adjustment Snapshot FlashPress + or 5 to select MANUAL, and press SELECT/SET If Auto Is SelectedTo Take a Snapshot In The 5-Second Recording Mode Second Recording GR-DX300 onlyInstead of pressing the Recording Start/Stop After approx secNight-Scope Programme AE With Special EffectsFade/Wipe Effects Snapshot Mode Selection Snapshot For Tape RecordingAuto Focus Snapshot RecordingManual Focus Exposure ControlPress + or 5 to select EXPOSURE, then press SELECT/SET To Return To Automatic Exposure ControlManual White Balance Operation White Balance AdjustmentIris Lock WIPE/FADER Program AEExposure BalanceManual System Camera DisplayVideo DSCFor Playback Menu Video Display Playback SoundDisplay DATE/TIME , Time CodeDubbing To Or From a VCR To Use This Camcorder As a PlayerTo Use This Camcorder As a Recorder DubbingTo DV Core filter DV cable optional To DV IN/OUT Using the Remote Control Unit Slow-Motion PlaybackPlayback Special Effects Playback ZoomSet 12bit Mode to Sound 2 or MIX Menu Screen  pg Audio DubbingInsert Editing To hear the dubbed sound during playbackMake Connections Random Assemble Editing R.A.EditSET REMOTE/VCR Code Select Scenes To Pause in jAdjustment of VCR/CAMCORDER Timing Automatic Editing to VCRFor More Accurate Editing Diagnosing VCR/CAMCORDER TimingUsing USB cable Using DV cableUsing USB cable Connection To a Personal ComputerNo power is supplied Focus does not adjust automaticallySnapshot mode cannot be used Image taken using Snapshot is too darkBlack & White Fader does not work During R.A.Edit, the Dissolve function does Not workScene transition does not go as expected Image looks like the shutter speed is too slowAn error indication E01, E02 or E06 appears An error indication E03 or E04 appearsCharger indicator on the camcorder does Not light During recording, sound cannot be heardGeneral Battery Precautions Battery PacksCassettes Memory CardsBuilt-in Clock’s Rechargeable Lithium Battery How to handle a CD-ROMLCD Monitor Main UnitFor Your Maintenance Cleaning The CamcorderAfter Use About moisture condensationCamcorder AC AdapterControls, Connectors And Indicators Flash Remote ControlIndex Viewfinder Speaker@ Power Switch Edit Connector  pgDigital Video Input/Output Connector Blank Search Button  pg VIDEO/MEMORY SwitchLCD Monitor/Viewfinder Indications During Memory Card Recording Only1024 During Both Tape And Memory Card RecordingAppears when in the Squeeze, Cinema or Appears when the Insert Editing w or InsertOr Animation recording mode  pg Displays the sound mode for approx secondsHigh Appears if a file in another format is selected E01, E02 or E06 Unit in Safeguard ModeE03 or E04 Unit in Safeguard Mode Eject Terms VIDEO/MEMORY Switch Position SD Memory CardUnload a Tape White BalanceAA/AG/AH/AS 0303-MK-ID-SN

0303-MK-ID-SN, ENLYT1127-001A specifications

The JVC ENLYT1127-001A,0303-MK-ID-SN is a state-of-the-art product designed for those who appreciate high-quality audio and functional versatility. This model stands out due to its exceptional sound performance, stylish design, and an array of features that cater to various user needs.

One of the main features of the ENLYT1127-001A is its advanced audio technology that delivers rich, clear sound across all frequency ranges. The device is engineered with high-fidelity components that minimize distortion, ensuring that users enjoy a pristine audio experience whether they're listening to music, watching movies, or gaming.

Additionally, the JVC ENLYT1127-001A incorporates innovative Bluetooth technology, allowing for seamless wireless connectivity with smartphones, tablets, and other devices. This wireless capability not only enhances convenience but also ensures that users can enjoy their audio content without the hassle of tangled wires.

The model also boasts a robust battery life, which is essential for users on the go. With quick charging capabilities, it provides extended usage time, making it an ideal choice for travel, outdoor adventures, or daily commutes. The ergonomic design of the device ensures comfort during extended use, making it suitable for long listening sessions.

In terms of compatibility, the JVC ENLYT1127-001A is designed to work with a variety of audio sources, from traditional music players to modern streaming services. This versatility means that users can enjoy their favorite media without limitations.

Another noteworthy characteristic is the sleek, modern aesthetic of the ENLYT1127-001A. Its design is not only functional, with intuitive controls that make operation straightforward, but also visually appealing, making it an attractive addition to any setup.

In summary, the JVC ENLYT1127-001A,0303-MK-ID-SN is a versatile and advanced audio solution that combines high-quality sound with modern features. Its impressive battery life, Bluetooth connectivity, and ergonomic design enhance the user experience, while its aesthetic appeal ensures it looks as good as it sounds. Whether you're a casual listener or a dedicated audiophile, this model promises to deliver an unparalleled audio experience that meets diverse needs.
Top Page Image Contents