JVC ENLYT1127-001A manual Release the stoppers on both ends of the Core Filter, Stopper, Sub Menu

Page 6

HOW TO ATTACH THE CORE FILTER

Attach the Core Filter(s) to the provided AC Adapter’s cord, S-Video/Audio/Video/Editing cable and USB cable. The Core Filter reduces interference.

1Release the stoppers on both ends of the Core Filter.

Stopper

21) Run the cable through the Core Filter, leaving approx. 3 cm of cable between the cable plug and the Core Filter.

If using the AC Adapter’s cord or USB cable, be sure to wind the cable once around the outside of the Core Filter as shown in the illustration. Wind the cable so that it is not slack.

NOTE: Take care not to damage the cable.

2)Close the Core Filter until it clicks shut.

For the AC Adapter’s cord and USB cable

3 cm

Wind once

For the S-Video/Audio/Video/Editing cable

3 cm

When connecting cables, attach the end with the Core Filter to the camcorder.

AUTOMATIC DEMONSTRATION

Automatic Demonstration takes place when “DEMO MODE” is set to “ON” (factory-preset).

Automatic Demonstration starts when there is no operation for about 3 minutes after the Power Switch @ is set to “ ” or “ ” and no cassette is in the camcorder.

Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 3 minutes after that, the demonstration will resume.

“DEMO MODE” remains “ON” even if the camcorder power is turned off.

To cancel Automatic Demonstration:

1.Set the Power Switch @ to “ ” while pressing down the Lock Button $ located on the switch and press MENU 4. The Menu Screen appears.

2.Press + or 5 to select “ (SYSTEM)” and press SELECT/SET 3.

3.Press + or 5 to select “DEMO MODE” and press SELECT/SET 3. The Sub Menu appears.

4.Press + or 5 to select “OFF” and press SELECT/SET 3.

5.Press + or 5 to select “ RETURN”, and press SELECT/SET 3 twice. The normal screen appears.

NOTE:

3 4 5 @ $

Sub Menu

SYSTEM

DEMO MODE – OF F

ON

RETURN

If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration activated on the LCD monitor or viewfinder.

EN

6

Image 6
Contents GR-DX300 GR-DX95 GR-DX75 Contents Safety Precautions Before recording an important scene AC Adapter’s cord pg Remote Control Unit RM-V717U Tab AAA R03Video/Editing Cable For attachmentRelease the stoppers on both ends of the Core Filter StopperSub Menu Using the Battery Pack PowerCharging the Battery Pack Using AC PowerLithium-ion is vulnerable in colder temperatures Grip AdjustmentViewfinder Adjustment About BatteriesApproximate recording time Tape Recording mode Tripod MountingLoading/Unloading a Cassette Date/Time Settings Recording Mode SettingPress + or 5 to select Camera and press SELECT/SET To Unload a Memory Card Loading a Memory Card Picture Quality/Image Size SettingTo select the desired mode and press SELECT/SET Press + or 5 to select DSC and press SELECT/SETShooting while using the viewfinder Pull out To Adjust The Brightness Of The DisplayShooting while using the LCD monitor Open Basic RecordingJournalistic Shooting Operation ModePower-Linked Operation Self-RecordingRecording from the Middle of a Tape To Control The Speaker VolumeTime Code Normal PlaybackPress Blank Search r To cancel Blank Search midwayBlank Search PressIf using a VCR . . . go to step If not . . . go to step ConnectionsTo TV or VCR To Remove The Shutter Sound Basic Shooting SnapshotTo Delete Unwanted Still Images To Protect Valuable Files available only for SD Memory CardApproximate Number of Storable Images To Adjust The Brightness Of The DisplaySee ÒTo Adjust The Brightness Of The DisplayÓ on GR-DX95/DX75Index Playback Viewing File InformationAuto Playback Removing On-Screen DisplayAdvanced Features Protecting Files Deleting FilesTo Remove Protection To ADD Thumbnail Images During Tape Playback Navigation FunctionTo Make Thumbnail Images During Tape Recording To Delete Thumbnail ImagesTo Make Video Clips from REAL-TIME Camera Image To cancel E-Mail Clip RecordingMail Clip Recording To Make Video Clips from Recorded Video FootageDubbing Still Images Recorded On a Tape To a Memory Card Setting Print Information Dpof SettingTo Reset The Setting To Print ALL Still Images ONE Print for EachMaking a New Folder To Reset The No. Of PrintsInitialising a Memory Card Folder and File namesPress + or 5 to select MANUAL, and press SELECT/SET Flash Brightness AdjustmentSnapshot Flash If Auto Is SelectedInstead of pressing the Recording Start/Stop To Take a Snapshot In The 5-Second Recording ModeSecond Recording GR-DX300 only After approx secNight-Scope Programme AE With Special EffectsFade/Wipe Effects Auto Focus Snapshot Mode SelectionSnapshot For Tape Recording Snapshot RecordingPress + or 5 to select EXPOSURE, then press SELECT/SET Manual FocusExposure Control To Return To Automatic Exposure ControlWhite Balance Adjustment Iris LockManual White Balance Operation Exposure WIPE/FADERProgram AE BalanceManual System Camera DisplayDSC For Playback MenuVideo Display Video DisplayPlayback Sound DATE/TIME , Time CodeTo Use This Camcorder As a Recorder Dubbing To Or From a VCRTo Use This Camcorder As a Player DubbingTo DV Core filter DV cable optional To DV IN/OUT Playback Special Effects Using the Remote Control UnitSlow-Motion Playback Playback ZoomInsert Editing Set 12bit Mode to Sound 2 or MIX Menu Screen  pgAudio Dubbing To hear the dubbed sound during playbackRandom Assemble Editing R.A.Edit SET REMOTE/VCR CodeMake Connections Select Scenes To Pause in jFor More Accurate Editing Adjustment of VCR/CAMCORDER TimingAutomatic Editing to VCR Diagnosing VCR/CAMCORDER TimingUsing USB cable Using USB cableUsing DV cable Connection To a Personal ComputerSnapshot mode cannot be used No power is suppliedFocus does not adjust automatically Image taken using Snapshot is too darkScene transition does not go as expected Black & White Fader does not workDuring R.A.Edit, the Dissolve function does Not work Image looks like the shutter speed is too slowCharger indicator on the camcorder does Not light An error indication E01, E02 or E06 appearsAn error indication E03 or E04 appears During recording, sound cannot be heardCassettes General Battery PrecautionsBattery Packs Memory CardsLCD Monitor Built-in Clock’s Rechargeable Lithium BatteryHow to handle a CD-ROM Main UnitAfter Use For Your MaintenanceCleaning The Camcorder About moisture condensationCamcorder AC AdapterIndex Controls, Connectors And IndicatorsFlash Remote Control Viewfinder SpeakerDigital Video Input/Output Connector @ Power SwitchEdit Connector  pg Blank Search Button  pg VIDEO/MEMORY Switch1024 LCD Monitor/Viewfinder IndicationsDuring Memory Card Recording Only During Both Tape And Memory Card RecordingOr Animation recording mode Appears when in the Squeeze, Cinema orAppears when the Insert Editing w or Insert  pg Displays the sound mode for approx secondsHigh E01, E02 or E06 Unit in Safeguard Mode E03 or E04 Unit in Safeguard Mode EjectAppears if a file in another format is selected Terms Unload a Tape VIDEO/MEMORY Switch PositionSD Memory Card White BalanceAA/AG/AH/AS 0303-MK-ID-SN

0303-MK-ID-SN, ENLYT1127-001A specifications

The JVC ENLYT1127-001A,0303-MK-ID-SN is a state-of-the-art product designed for those who appreciate high-quality audio and functional versatility. This model stands out due to its exceptional sound performance, stylish design, and an array of features that cater to various user needs.

One of the main features of the ENLYT1127-001A is its advanced audio technology that delivers rich, clear sound across all frequency ranges. The device is engineered with high-fidelity components that minimize distortion, ensuring that users enjoy a pristine audio experience whether they're listening to music, watching movies, or gaming.

Additionally, the JVC ENLYT1127-001A incorporates innovative Bluetooth technology, allowing for seamless wireless connectivity with smartphones, tablets, and other devices. This wireless capability not only enhances convenience but also ensures that users can enjoy their audio content without the hassle of tangled wires.

The model also boasts a robust battery life, which is essential for users on the go. With quick charging capabilities, it provides extended usage time, making it an ideal choice for travel, outdoor adventures, or daily commutes. The ergonomic design of the device ensures comfort during extended use, making it suitable for long listening sessions.

In terms of compatibility, the JVC ENLYT1127-001A is designed to work with a variety of audio sources, from traditional music players to modern streaming services. This versatility means that users can enjoy their favorite media without limitations.

Another noteworthy characteristic is the sleek, modern aesthetic of the ENLYT1127-001A. Its design is not only functional, with intuitive controls that make operation straightforward, but also visually appealing, making it an attractive addition to any setup.

In summary, the JVC ENLYT1127-001A,0303-MK-ID-SN is a versatile and advanced audio solution that combines high-quality sound with modern features. Its impressive battery life, Bluetooth connectivity, and ergonomic design enhance the user experience, while its aesthetic appeal ensures it looks as good as it sounds. Whether you're a casual listener or a dedicated audiophile, this model promises to deliver an unparalleled audio experience that meets diverse needs.