JVC ENLYT1127-001A, 0303-MK-ID-SN manual Manual Focus, To Return To Automatic Exposure Control

Page 30

Manual Focus

To obtain correct focus.

1 If you are using the viewfinder, you should already have made the necessary viewfinder adjustments ( pg. 8).

2 Set the Power Switch @ to “ ” while pressing down the Lock Button $ located on the switch, then press FOCUS r ( pgs. 52 and 53). The manual focus indicator appears.

3 To focus on a farther subject, press + 5 . “ ” R appears and blinks.

To focus on a nearer subject, press – 5. “ ” R appears and blinks.

4 Press SELECT/SET 3. Focus adjustment is complete.

To reset to Auto Focus, press FOCUS r twice or set the Power Switch @ to “ ”.

If FOCUS r is pressed once, the camcorder will enter the focus adjustment mode again.

NOTES:

●Be sure to focus the lens in the maximum telephoto position when you use the Manual Focus mode. If you focus in on a subject in the wide-angle position, sharply focused images cannot be obtained when zoomed up because the depth-of-field is reduced at longer focal lengths.

●When the focus level cannot be adjusted any further or closer, “ ” or “ ” will blink.

Focus detection zone

While focusing on

While focusing on

a further subject

a nearer subject

Exposure Control

Manual exposure adjustment is recommended in the following situations:

•When shooting using reverse lighting or when the background is too bright.

•When shooting on a reflective natural background such as at the beach or when skiing.

•When the background is overly dark or the subject light.

1 Set the Power Switch @ to “ ” while pressing down the Lock Button $ located on the switch. Open the LCD monitor fully or pull out the viewfinder fully.

2 Press MENU 4. The Menu Screen appears.

3 Press + or – 5 to select “ (EXPOSURE)”, then press SELECT/SET 3.

4 Press + or – 5 to select “MANUAL”, then press SELECT/SET 3. The Menu Screen disappears. The exposure control indicator appears.

5 Press + 5 to brighten the image, or – 5 to darken the image. (maximum ±6)

6 Press SELECT/SET 3. Exposure adjustment is complete.

To Return To Automatic Exposure Control . . .

..... select “AUTO” in step 4. Or, set the Power Switch

@to “ ”.

To Brighten The Subject Quickly . . .

 

 

..... press BACKLIGHT w.

 

r is displayed and the

 

subject is brightened. If pressed again,

 

r

 

disappears and the brightness returns to the previous level.

•+3 exposure has the same effect as the BACKLIGHT Button w.

•Using BACKLIGHT w may cause the light around the subject to become too bright and the subject to become white.

•Backlight compensations is also available when the Power Switch @ is set to “ ”.

NOTE:

You cannot use the manual exposure control at the same time with backlight, spotlight ( pg. 27) compensation and “SNOW” ( pg. 27).

EN

30 FOR RECORDING

Page 29 Page 31
Image 30
Page 29 Page 31
Contents GR-DX300 GR-DX95 GR-DX75 Contents Safety Precautions Before recording an important scene AC Adapter’s cord pg Remote Control Unit RM-V717U Tab AAA R03Video/Editing Cable For attachmentRelease the stoppers on both ends of the Core Filter StopperSub Menu Using the Battery Pack PowerCharging the Battery Pack Using AC PowerLithium-ion is vulnerable in colder temperatures Grip AdjustmentViewfinder Adjustment About BatteriesApproximate recording time Tape Recording mode Tripod MountingLoading/Unloading a Cassette Date/Time Settings Recording Mode SettingPress + or 5 to select Camera and press SELECT/SET To Unload a Memory Card Loading a Memory Card Picture Quality/Image Size SettingTo select the desired mode and press SELECT/SET Press + or 5 to select DSC and press SELECT/SETShooting while using the viewfinder Pull out To Adjust The Brightness Of The DisplayShooting while using the LCD monitor Open Basic RecordingJournalistic Shooting Operation ModePower-Linked Operation Self-RecordingRecording from the Middle of a Tape To Control The Speaker VolumeTime Code Normal PlaybackPress Blank Search r To cancel Blank Search midwayBlank Search PressIf using a VCR . . . go to step If not . . . go to step ConnectionsTo TV or VCR To Remove The Shutter Sound Basic Shooting SnapshotTo Delete Unwanted Still Images To Protect Valuable Files available only for SD Memory CardApproximate Number of Storable Images To Adjust The Brightness Of The DisplaySee ÒTo Adjust The Brightness Of The DisplayÓ on GR-DX95/DX75Index Playback Viewing File InformationAuto Playback Removing On-Screen DisplayAdvanced Features Protecting Files Deleting FilesTo Remove Protection To ADD Thumbnail Images During Tape Playback Navigation FunctionTo Make Thumbnail Images During Tape Recording To Delete Thumbnail ImagesTo Make Video Clips from REAL-TIME Camera Image To cancel E-Mail Clip RecordingMail Clip Recording To Make Video Clips from Recorded Video FootageDubbing Still Images Recorded On a Tape To a Memory Card Setting Print Information Dpof SettingTo Reset The Setting To Print ALL Still Images ONE Print for EachMaking a New Folder To Reset The No. Of PrintsInitialising a Memory Card Folder and File namesPress + or 5 to select MANUAL, and press SELECT/SET Flash Brightness AdjustmentSnapshot Flash If Auto Is SelectedInstead of pressing the Recording Start/Stop To Take a Snapshot In The 5-Second Recording ModeSecond Recording GR-DX300 only After approx secNight-Scope Programme AE With Special EffectsFade/Wipe Effects Auto Focus Snapshot Mode SelectionSnapshot For Tape Recording Snapshot RecordingPress + or 5 to select EXPOSURE, then press SELECT/SET Manual FocusExposure Control To Return To Automatic Exposure ControlWhite Balance Adjustment Iris LockManual White Balance Operation Exposure WIPE/FADERProgram AE BalanceManual System Camera DisplayDSC For Playback MenuVideo Display Video DisplayPlayback Sound DATE/TIME , Time CodeTo Use This Camcorder As a Recorder Dubbing To Or From a VCRTo Use This Camcorder As a Player DubbingTo DV Core filter DV cable optional To DV IN/OUT Playback Special Effects Using the Remote Control UnitSlow-Motion Playback Playback ZoomInsert Editing Set 12bit Mode to Sound 2 or MIX Menu Screen  pgAudio Dubbing To hear the dubbed sound during playbackRandom Assemble Editing R.A.Edit SET REMOTE/VCR CodeMake Connections Select Scenes To Pause in jFor More Accurate Editing Adjustment of VCR/CAMCORDER TimingAutomatic Editing to VCR Diagnosing VCR/CAMCORDER TimingUsing USB cable Using USB cableUsing DV cable Connection To a Personal ComputerSnapshot mode cannot be used No power is suppliedFocus does not adjust automatically Image taken using Snapshot is too darkScene transition does not go as expected Black & White Fader does not workDuring R.A.Edit, the Dissolve function does Not work Image looks like the shutter speed is too slowCharger indicator on the camcorder does Not light An error indication E01, E02 or E06 appearsAn error indication E03 or E04 appears During recording, sound cannot be heardCassettes General Battery PrecautionsBattery Packs Memory CardsLCD Monitor Built-in Clock’s Rechargeable Lithium BatteryHow to handle a CD-ROM Main UnitAfter Use For Your MaintenanceCleaning The Camcorder About moisture condensationCamcorder AC AdapterIndex Controls, Connectors And IndicatorsFlash Remote Control Viewfinder SpeakerDigital Video Input/Output Connector @ Power SwitchEdit Connector  pg Blank Search Button  pg VIDEO/MEMORY Switch1024 LCD Monitor/Viewfinder IndicationsDuring Memory Card Recording Only During Both Tape And Memory Card RecordingOr Animation recording mode Appears when in the Squeeze, Cinema orAppears when the Insert Editing w or Insert  pg Displays the sound mode for approx secondsHigh E01, E02 or E06 Unit in Safeguard Mode E03 or E04 Unit in Safeguard Mode EjectAppears if a file in another format is selected Terms Unload a Tape VIDEO/MEMORY Switch PositionSD Memory Card White BalanceAA/AG/AH/AS 0303-MK-ID-SN

0303-MK-ID-SN, ENLYT1127-001A specifications

The JVC ENLYT1127-001A,0303-MK-ID-SN is a state-of-the-art product designed for those who appreciate high-quality audio and functional versatility. This model stands out due to its exceptional sound performance, stylish design, and an array of features that cater to various user needs.

One of the main features of the ENLYT1127-001A is its advanced audio technology that delivers rich, clear sound across all frequency ranges. The device is engineered with high-fidelity components that minimize distortion, ensuring that users enjoy a pristine audio experience whether they're listening to music, watching movies, or gaming.

Additionally, the JVC ENLYT1127-001A incorporates innovative Bluetooth technology, allowing for seamless wireless connectivity with smartphones, tablets, and other devices. This wireless capability not only enhances convenience but also ensures that users can enjoy their audio content without the hassle of tangled wires.

The model also boasts a robust battery life, which is essential for users on the go. With quick charging capabilities, it provides extended usage time, making it an ideal choice for travel, outdoor adventures, or daily commutes. The ergonomic design of the device ensures comfort during extended use, making it suitable for long listening sessions.

In terms of compatibility, the JVC ENLYT1127-001A is designed to work with a variety of audio sources, from traditional music players to modern streaming services. This versatility means that users can enjoy their favorite media without limitations.

Another noteworthy characteristic is the sleek, modern aesthetic of the ENLYT1127-001A. Its design is not only functional, with intuitive controls that make operation straightforward, but also visually appealing, making it an attractive addition to any setup.

In summary, the JVC ENLYT1127-001A,0303-MK-ID-SN is a versatile and advanced audio solution that combines high-quality sound with modern features. Its impressive battery life, Bluetooth connectivity, and ergonomic design enhance the user experience, while its aesthetic appeal ensures it looks as good as it sounds. Whether you're a casual listener or a dedicated audiophile, this model promises to deliver an unparalleled audio experience that meets diverse needs.
Top Page Image Contents