Kenwood MZ-B3 manual Additional information

Page 33

Symptom	Cause/Solution
Sound has a lot of	•Strong magnetism from a television or such device is
static.	interfering with operation.
	b Move away from the source of strong magnetism.

The REC button stays	•You pressed the REC button while the recorder was
pressed down.	not connected to the power source.
	b Install dry batteries or a rechargeable battery. Or
	connect to house current with the AC power
	adaptor (page 6 or 27).

Cannot erase the track	•You tried to erase the track marks after pressing =
marks.	or +and pressing P.
	b Press P before pressing =or +, then erase
	the track marks.

The clock loses time or	•The built-in battery for a clock is weak.
the display flashes.	b Connect the power source to charge the built-in
	battery. After charging, set the clock again. Note
	that the clock normally loses about 2 minutes per
	month (page 18).

The recording date was	•The time indication flashes.
not stamped onto the	b Set the clock again (page 17).
disc.

Cannot record for	•When a lot of short tracks are recorded on a disc, the
the maximum	total recording time may be shorter than the
recording time of a	maximum recording capacity.
disc.	•You recorded over a previous recording repeatedly
	•You recorded over a previous recording repeatedly
	(page 33).
	b Erase all the tracks of the disc, then start recording
	(page 26).

Additional information

33

SONY MZ-B3 (E) 3-798-610-22(1)

Image 33

Contents Portable MiniDisc Recorder Information Owner’s RecordFor Customers in the USA Welcome Table of contents Additional information Power sourcesSlide Open and open BottomLid Alkaline batteriesSound source Microphone Recording an MD rightPress Display window while recordingInsert an MD with the label Lid down to closeDisplay window while playing back Play PressTo listen in stereo sound If the play does not startDictating IndicatorStop To release the digital VOR functionRecording in stereo with an external microphone Stereo microphone To MIC Plug in Power Mono monauralTo stop recording VariousRecording from other equipment Red White RK-G128 not supplied To MIC Plug in PowerPortable CD player, portable MD player, etc To 2 or To record from a monaural playerTrack marking while recording Track marking to divide a recordingContinue to next page m Tips on track marks Track marking important pointsTips on recording ∙ While in stop mode To know the remaining time, etc∙ While recording If you make a mistake while setting the clock Setting the clock to stamp the recorded timeWays RecordingCharging the built-in battery for the clock Listening at a fast speed To switch to normal playbackPlaying tracks repeatedly Various waysTo know the time and track name Tips on playbackTo lock the controls Hold function VariousTo listen with a monaural player Listening with other equipmentEditing recorded Various ways Track marking a recordingTrack marking Track numbers increase To add track marks while recordingErase a track mark Track numbers decrease Erasing a track markPause Appears for about 2 secondsTo erase a part of a track Erasing a trackPstop Play To erase other tracksRREC Pstop Erasing a whole discUsing on house current Using on a lithium ion rechargeable batteryTo wall outlet AC-E45HG AC power adaptor not supplied To DC Battery lifea When to charge or replace the batteriesBatteries Record Ing bPrecautions You cannot record using a timer To remove the manganese dioxide lithium batteryFor Customers in the USA Mechanical shock or vibrationAdditional information Symptom Cause/Solution TroubleshootingAdditional information System limitations Symptom CauseError message Meaning/Remedy Error messagesTR Full Specifications SystemGeneral Optional accessories What is the MD?How MiniDiscs work Premastered MDsHow the MiniDisc got so small Quick Random AccessShock-Resistant Memory User TOC Music Data AreaRecorder Looking at the controlsDisplay window Current locationRecorded portion Disc length Carrying case Remote controllerSony MZ-B3 E Sony MZ-B3 E