3Record an MD.
Sound source
Microphone
Recording an MD right
Press rREC.
"REC" and "MONO" appear in the display, and recording starts from the beginning of the disc. The level of the recorded sound is adjusted automatically.
To stop recording, press p (stop).
"Toc Edit" flashes to store data of the recording (the track’s start and end points, etc.). Do not move or jog the recorder or disconnect the power source while the indication is flashing in the display. When the recorder completes storing the data, the r REC button will be released.
away!
To | Press |
Pause | P* |
| Press P again to |
| resume |
| recording. |
Record from the | END SEARCH, |
end of the | then press |
previous | rREC. |
recording |
|
|
|
Record over | (, +or = |
partway through | to find point to |
the previous | start recording, |
recording | and press p to |
| stop. Then press |
| rREC. |
|
|
Remove the MD | pand open the |
| lid.* |
*Once you open the lid, the point to start recording will change to the beginning of the first track. When recording on a recorded MD, check the point to start recording on the display.
If the recording does not start
∙Make sure the recorder is not locked (page 21).
∙Make sure the MD is not record- protected (page 15).
The alkaline batteries' life
You can record an MD with new alkaline batteries for 3 hours.
Display window while recording
Elapsed time of the track being
Track number recorded
REC
MONO
Position indicator (shows the current location on the MD)
7
SONY