Erasing a track mark
You can erase a track mark to combine the tracks before and after the track mark. You can erase regular track marks and special track marks in the same way.
The track numbers will change as follows.
1 | 2 | 3 | 4 |
4
.Erase a track mark
12 3
Track numbers decrease
TRACK MARK
P (pause)
=/+
1 While the recorder is playing an MD, press Pto pause.
2 Find the track mark you want to erase by pressing = or + slightly.
The track number and "MARK" appear in the display.
For example, to erase the third track mark, find the beginning of the third track.
Appears for about 2 seconds
MONO
24
3 Press TRACK MARK on the recorder to erase the mark.
The track mark is erased and the two tracks are combined.
MONO
MONO
To erase other track marks
Repeat steps 2 and 3.
Notes
∙When you press p after erasing track marks, "Toc Edit" flashes and the recorder starts writing the new data to the MD. Do not move or jog the recorder while "Toc Edit" is flashing in the display.
∙You cannot ease track marks on an MD that is
SONY