Panasonic AG-DVC60 Scene File screen, Camera Setup screen, Description of settings, Mode, +15

Menu configuration (cont.)

SCENE FILE screen

Item/
(Display	Description of settings
mode)
SCENE FILE	Settings corresponding to four shooting con-
(CAM)	ditions are saved as scene files in this cam-
	era-recorder. Use this item to select the
	scene file to be used.
	1. SCENE1:
	For files where the various menu settings
	are normal.
	2. SCENE2:
	The same as SCENE 1 (this is an extra).
	3. B.PRESS:
	This file is useful for shooting dark areas
	with a sharper contrast.
	4. MOVIE-LIKE:
	This file is useful for shooting movie-like
	images.
	<Note>
	You can change the settings in the scene files
	using the SETTING item.
SETTING	Use this to change the settings in the scene
(CAM)	files.
	DETAIL LEVEL:
	–7 --- 0 --- +7
	Set this level in the “–” direction to soften
	the image outlines.
	When it is set in the “+” direction, the
	image outlines are emphasized and sharp
	images are produced, but the amount of
	noise is increased slightly.
	CHROMA LEVEL:
	–7 --- 0 --- +7
	Set this level in the “–” direction to make
	the image colors lighter.
	Set it in the “+” direction to make them
	darker.
	CHROMA PHASE:
	–7 --- 0 --- +7
	Use this to adjust the hue.
	COLOR TEMP:
	–7 --- 0 --- +7
	Set this in the “–” direction to make the
	images more reddish overall.
	Set it in the “+” direction to make the
	images more bluish overall.
	MASTER PED:
	–15 --- 0 --- +15
	Set this in the “–” direction to make the
	images darker overall. When a setting
	below –5 is selected, the dark parts of the
	images may become blackened out.
	When it is set in the “+” direction, the dark
	parts of the images (such as the shadows)
	become brighter.
	AE SHIFT:
	–4 --- 0 --- +4
	Use this to adjust the auto iris setting.
	Set it in the “–” direction for a darker set-
	ting.
	Set it the “+” direction for a brighter set-
	ting.

Item/
(Display	Description of settings
mode)
	SKIN TONE DTL:
	OFF, ON
	When ON is selected, soft skin tones are
	reproduced when people are shot, making
	them look more attractive.
	REC MODE:
	NORM
	Shooting is performed using field record-
	ing (60 fields per second).
	FRAME
	Shooting is performed using frame record-
	ing (30 frames per second).
	High-quality images can be obtained at
	this setting when playing back still images,
	for example.
NAME EDIT	Use this to edit the name of the selected
(CAM)	scene file.
SAVE/INIT	SAVE:
(CAM)	The changed settings in the scene file
	(one of the files listed in the file selection
	item) are saved.
	The original scene file settings will be
	restored when the menu mode is
	released, the operation is switched to the
	VCR mode or when the power is turned off
	if SAVE has not been selected.
	INITIAL:
	The selected scene file settings are
	returned to the factory settings.
	The underlining indicates the factory set-
	ting.

CAMERA SETUP screen

Item/
(Display	Description of settings
mode)
SYNCRO	Use this to adjust the synchro scan shutter
SCAN	speed used for shooting images on a TV
(CAM)	screen, etc. (P38, 39)
	1/60.3 --- 1/250
ASPECT	Use this to select the aspect ratio of the
CONV	images which are to be recorded. (P35)
(CAM)	Cannot be changed during still shooting.
	NORMAL, LETTER BOX, SQUEEZE
COLOR BAR	Select ON to show the color bar.
(CAM)	Cannot be changed during still shooting.
	OFF, ON
SETUP	Use this to add the setup level (black level).
(CAM)	0%:
	The setup level is not added.
	7.5%:
	A 7.5% setup level is added for recording.

The underlining indicates the factory setting.

66