Panasonic AG-DVC60 Beep, User File Load Sound, OFF, on Save, Hour, Clock SET, Time Shift, Tape

OTHER FUNCTIONS screen

Item/			Item/
(Display		Description of settings	(Display	Description of settings
mode)			mode)
BEEP	Select ON to be warned by a beep that the		USER FILE	LOAD:
SOUND	shooting has started or ended or that a prob-		(CAM) (VCR)	The menu (except scene file) settings
(CAM)	lem has occurred.			which were saved last are loaded.
	OFF, ON			SAVE:
				The changed menu settings are saved.
	The beeps are output as audio signals from			INITIAL:
	the PHONES jack and AV IN/OUT jack. When			The menu settings are returned to the fac-
	a beep is sounded, the audio signals from the			tory settings.
	built-in microphone are muted and the beep			• When the power is turned off without
	is output instead.			selecting SAVE, the VCR mode menu set-
	One beep sounds:			tings will be saved but the CAMERA mode
	• when the POWER lever is set to the ON			menu settings will be returned to the origi-
		position		nal settings.
	•	when shooting has started		• When a LOAD or INITIAL operation has
	Two beeps sound:			been performed, set the camera-
	•	when shooting is paused		recorder’s POWER lever first to the OFF
	10 beeps sound in succession:			position and then back to ON in order to
	• when a cassette tape has not been inserted			ensure that the settings concerned will
	•	when the cassette tape is set to the record-		take effect.
		ing inhibited status
			HOUR	Use this to display the total running time (a 5-
	•	when condensation has formed inside the
			METER	digit figure in 1-hour increments) of the cylin-
		camera-recorder	(CAM) (VCR)	der head.
	•	when a problem has occurred in the cam-
		era-recorder
CLOCK SET	Use this to set the camera-recorder’s internal
(CAM) (VCR)	calendar.
TIME SHIFT	The time set using this item is added to the
(CAM) (VCR)	clock time of the internal calendar (time differ-
	ence compensation) and displayed on the
	viewfinder and LCD monitor. The added time
	is also recorded on the tape.
	+23h --- +1h, OFF, –1h --- –23h
	(In 1-hour increments)
TAPE	When the camera-recorder has been left in
PROTECT	the pause mode for about 5 minutes, it is
(CAM)	automatically set to the tape protection mode.
	Use this item to select the kind of tape protec-
	tion mode to be established.
	POWER OFF:
		The camera-recorder’s power is set to
		OFF.
	STBY:
		The cylinder head is set to the stop status.
IR LED	Use this to set the control over the infrared
(CAM)	light which is used during high-sensitivity
	recording. (P32)				MENUS
	AUTO:
		The infrared light comes on as soon as the
		high-sensitivity shooting mode is estab-
		lished.
	OFF:
		The infrared light does not come on no
		matter whether the high-sensitivity shoot-
		ing mode is established or not.
			The underlining indicates the factory setting.

73