Zebra Technologies S-500 manual Voltage Selection, AC Power Cable

Getting Started

Voltage Selection

The Stripe is available from the factory preset for either 100-120 VAC electrical power or 220-240 VAC electrical power. Refer to the product label on the back of the printer and make sure that the unit is properly configured for your power requirements.

AC Power Cable

The AC Power Cable has a three-prong female connector on one end. See Figure 2. This connector must be plugged into the mating connector on the left side of the printer. See Figure 1.

The electrical connection at the other end of the AC Power Cable will be one of the following:

∙US Standard 110 VAC three-prong plug

∙Great Britain Standard 220 VAC three-prong plug

∙European Standard 220 VAC three-prong plug

WARNING!! For personnel and equipment safety, always use a three-prong plug with an earth ground connection.

Insure that the AC Power ON/OFF Switch is in the OFF (0) position before connecting the AC Power Cable to a nearby electrical outlet.

1

Figure 1 Cable Connections

Figure 2 AC Power Cable

3