Zebra Technologies S-500 manual Unpacking, Reporting Damage

1 Getting Started

1

Congratulations! You have just purchased a high-quality thermal demand printer manufactured by the industry leader in quality, service, and value–Zebra Technologies Corporation. For over 25 years, Zebra has provided customers with the highest caliber of products and support.

This manual provides all of the information you will need to operate your printer on a daily basis. To create label formats, refer to the ZPL II Programming Guide (part # 46469L–if you did not order one with your printer, it is available free by sending in the postcard at the front of this manual).

There is also a two-volume maintenance manual for this printer. Volume 1: General Maintenance (part # 44868L) contains the information you may need in order to maintain your printer, and Volume 2: Circuit Descriptions and Electrical Schematics (part # 44869L) contains information necessary for repairing the circuit boards at the component level. You may order both volumes by specifying part # 44452L.

Unpacking

Save the carton and all packing materials in case shipping is ever required.

Inspect the printer for possible damage incurred during shipment.

∙Check all exterior surfaces for damage.

∙Raise the Media Access Door and inspect the Media Compartment for damage to components.

Reporting Damage

If you discover shipping damage upon inspection:

∙Immediately notify the shipping company of the damage.

∙Retain all packaging material for shipping company inspection.

∙File a damage report with the shipping company and notify your local distributor and Zebra Technologies Corporation of the damage.

Zebra Technologies Corporation is not responsible for any damage incurred during shipment of the equipment and will not repair this damage under warranty. Immediate notification of damage to the shipping company or its insuring agency will generally result in ensuring any damage claim validity and ultimate monetary compensation.

1