Panasonic AG-DVC60 manual AV IN/OUT Setup screen, Display Setup screen

AV IN/OUT SETUP screen

Item/
(Display	Description of settings
mode)
A. DUB	Use this to select the sound to be recorded
INPUT	when performing audio dubbing.
(VCR)	MIC:
	The sound of the internal microphone or
	external microphone is recorded. (P52)
	A_IN:
	The sound of the audio unit connected to
	the AUDIO IN/OUT jack is recorded.
	<Note>
	If audio dubbing is performed on a recording
	which was made in the 48K (16-bit) audio
	mode, the sound heard during shooting will
	be overwritten and the dubbed sound
	recorded in its place.
DV OUT	Select the ON setting when converting analog
(VCR)	input signals into digital signals and output-
	ting them from the DV connector.
	OFF, ON

DISPLAY SETUP screen

Item/
(Display	Description of settings
mode)
ZEBRA	Use this to set the brightness level at which
DETECT	the zebra patterns are to be displayed.
(CAM)	80%, 85%, 90%, 95%, 100%, 105%
VIDEO OUT	Select the ON setting to output the informa-
OSD	tion displayed on the screen together with the
(CAM) (VCR)	signals from the VIDEO IN/OUT jack.
	OFF, ON
DATE/TIME	Use this to set whether to display the date
(CAM) (VCR)	and/or time on the screen and on the signals
	that are output from the VIDEO IN/OUT jack.
	OFF:
	The date and time are not displayed.
	TIME:
	The time is displayed.
	DATE:
	The date is displayed.
	TIME&DATE:
	The date and time are displayed.
	• If any setting other than OFF is selected,
	the time and/or date are displayed for the
	signals that are output from the AV IN/
	OUT jack, regardless of the setting
	selected for the VIDEO OUT OSD item.
LEVEL	Select ON to display the audio level meter on
METER	the screen.
(CAM) (VCR)	OFF, ON
DISPLAY	Use this to set the amount of information to
(CAM) (VCR)	be displayed on the screen. (P61)
	OFF, PARTIAL, ALL
CAMERA	With the ON setting, the camera settings
DATA	(vibration reduction, F-number, gain value
(VCR)	and white balance information) at the time of
	shooting are displayed when the tape is
	played back.
	OFF, ON
	<Note>
	When a tape on which the unit’s camera set-
	tings has been recorded is played back on
	another unit, the camera settings may not be
	displayed properly.
LCD	Use this to adjust the backlight of the LCD
BACKLIGHT	monitor.
(CAM) (VCR)	When HI is selected, the backlight is made
	brighter than usual.
	HI, NORMAL	MENUS
The underlining indicates the factory setting.

71