Samsung DVD-TR520 Setting up Progressive scan, AV1 Video Input, TV Aspect, Input Level

5 Press the …† buttons to select the desired item, then press the ENTER or √ button.

■ Press the RETURN or œ button to return

3D Noise Reduction (motion adaptive noise reduction)

1.Off : Normal

2.On : Provides a cleaner picture through noise reduction (for recording).

NOTE

to the previous menu.

Press the MENU button to exit the menu.

AV1 VIDEO Input

1.Composite:AV1 Video Input is Composite.

2.S-Video:AV1 Video Input is S-Video.

System Setup

TV Aspect

Depending on the type of television you have, you may want to adjust the screen setting. (aspect ratio)

1.4:3 Letter Box : Select when you want to see the total 16:9 ratio screen the DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at

the top and bottom of the screen.

2.4:3 Pan/Scan : Select this for conventional size TV when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)

3.16:9 Wide : You can view the full 16:9 picture on your widescreen TV.

Input Level

Adjusts the level of the input signal.

1.Darker : If you feel the screen is too light and you want to make the sceen darker.

2.Lighter : If you feel the screen is too dark and you want to make the sceen lighter.

■ Set the AV1 Video input setting to correspond to the input source.

NOTE

Setting up the

Progressive scan

If the TV supports Progressive Scan, press the P.SCAN button on the front of the TWIN TRAY DVD RECORDER to enjoy. If you select ‘progressive scan mode’, the component cable has to be connected at first. (See page 21)

Be sure the Component cables are connected properly.

1	With the unit in Stop mode / No Disc mode, press the
	P.SCAN button on the front of the TWIN TRAY DVD

RECORDER.

The message “Press [Yes] to confirm Progressive scan mode. Otherwise, press [No].” will appear. Press the œ √ buttons to select Yes, and then press the ENTER button.

Black Level

Adjusts the black level of the screen.

1.0 IRE : This is the standard NTSC reference black level for consistent brightness/ contrast across all sources.

Select this when you want darker screen.

2.7.5 IRE : This will enhance the black level for increased brightness/contrast when viewing DVDs. Select this when you want lighter screen.

38 - English

Press [Yes] to confirm Progressive scan mode.

Otherwise, press [No].

Yes No