Samsung DVD-TR520 Power Cord, Method 2 Connecting a Camcorder to the AV 2 in jacks

Method 2 : Connecting a

Camcorder to the AV 2 IN jacks

You can also use the AV 2 IN jacks on the front panel of the TWIN TRAY DVD RECORDER. You can record from connected equipment, such as a camcorder.

When an input source (such as a camcorder) is inserted into AV 2 IN while viewing TV, the input will be switched to AV 2 IN automatically. If the input is not selected automatically, press the INPUT button to select proper input.

Connecting & Setting up

Step 5 : Connecting the

Power Cord

After all connections are complete, plug the power cord in the wall outlet.

“Auto” appears in the panel display. This means that the current time is being set automatically (Auto Program) through the antenna under connection and also the channel is being set. The setup may take a few minutes.

When the TWIN TRAY DVD RECORDER operates normally, the current time is automatically set and displayed in the front panel display.

Method 3 : Connecting a Camcorder to the DV IN jack

If your camcorder has a DV output jack, connect it to the DV input jack of your TWIN TRAY DVD RECORDER.

■ After the current time is set automatically, the TWIN TRAY DVD RECORDER will

NOTE

perform Auto Channel Memory for about 3 minutes. If power is on, while Auto Channel Memory is in process, Auto Channel Memory will stop. In this case, do Auto Channel Memory from MENU (See page 29).

■ The input setting will automatically change to DV when the camcorder is

NOTE connected and powered on.

24 - English