74 - English
Recording
3
Press the REC MODEbutton repeatedly, (or press the
REC MODEbutton and then press the
buttons) to
select the recording speed (quality).
SPLP EPXP
4
Press the RECbutton.
Information concerning the channel is displayed
on the screen, then recording begins.
Icon( ) is displayed on the front panel.

- To pause recording -

• Press the REC PAUSEbutton to pause a recording
in progress.
• Press the REC PAUSEbutton again during pause to
resume recording.
• You can switch channels by pressing the
CH ( ) buttons while recording pauses.
- To stop recording -
Press the STOP( ) button to stop or finish a
recording in progress.
When using DVD-RAM/-RW/-R discs, the message
“Updating the information of disc. Please wait for a
moment” is displayed.
You cannot change the recording mode

and the channel while recording.

Recording will stop automatically if there is

no free space left for recording.

Up to 99 titles can be recorded onto a

disc.(DVD-RAM/-RW/-R)

Recording will stop automatically if a copy

protected image is selected.

DVD-RAM/-RW discs must be formatted

before starting to record. Most new discs

are sold unformatted.

Do not use DVD-R authoring discs with

this TWIN TRAYDVD RECORDER.

NOTE
Record Mode
SP031:39
Recording : CH 11 [Mono]
Recording from externalequipment you are watching
Check that the disc has enough available space for the
recording. Adjust the recording mode.
1
Press the RECORDERbutton on the front panel or R
button on the remote control. Press the OPEN/CLOSE
button and place a recordable disc on the disc tray.
Press the OPEN/CLOSEbutton to close the disc tray.
Wait until LOADdisappears from the front panel display.
If an unused DVD-RAM disc is used, whether to format
or not will be asked first. (See page 72)
If an unused DVD-RW disc is used, whether to initialize
or not will be asked first. (See page 72)
2
Press the INPUTbutton to select the input source
according to the connection you made.
The front panel display changes in the following
sequence:
CH Number
AV 1
AV 2
DV
If you connect a digital camcorder, press the INPUT
button to select DV. (See pages 75~76)

Before you start

00627D-DVD-TR520_XAA_71-80 2005.7.26 9:35 AM Page 74