Step 1: Connecting the

Antenna Cable

 

There are several ways to connect your TWIN TRAY DVD

 

RECORDER. Select the antenna that best suits you below.

up

• Method 1 : Antenna + TWIN TRAY DVD RECORDER + TV : No

Cable box

Setting

• Method 2 : Antenna +Cable box + TWIN TRAY DVD

 

 

RECORDER + TV : Cable box with many scrambled channels

&

• Method 3 : Antenna + TWIN TRAY DVD RECORDER + Cable

box +TV : Cable box with a few scrambled channels

Connecting

 

 

If you are using an off-air antenna that

Method 1 : Antenna + TWIN TRAY

DVD RECORDER + TV : No Cable box

You can record non-scrambled channels by selecting the channel on the TWIN TRAY DVD RECORDER. Also use this Method if you watch channels without a cable box.

To ANT IN

NOTE

has 300-ohm twin flat leads, use an external antenna connector (300-75 ohm adaptor : not supplied) to connect the antenna to the TWIN TRAY DVD RECORDER.

To ANT OUT

TV

RF Cable

TO ANT INPUT

If you have two separate antennas (one VHF and the other UHF), use a UHF/VHF combiner-adaptor (available at most electronics shops) to connect the antenna to the TWIN TRAY DVD RECORDER.

The ANT OUT RF OUT jack of this product sends only signals received through the antenna. It does not output Audio/Video signals. You must connect Audio/Video cables to view Video from the unit. (i.e. DVD playback)

18 - English

Page 18
Image 18
Samsung DVD-TR520 instruction manual Antenna Cable, Method 1 Antenna + Twin Tray DVD Recorder + TV No Cable box