Setup menu list (continued)

AV IN/OUT SETUP screen (continued)

Item

Display

Description of settings

mode

 

 

 

 

 

INT MIC

(Camera)

Determines whether or not input from the internal microphone is used

 

 

during recording.

 

 

ON: Uses internal microphone input.

 

 

OFF: Does not use internal microphone input.

DISPLAY SETUP screen

Item

Display

Description of settings

mode

 

 

 

 

 

ZEBRA DETECT 1

(Camera)

Selects the brightness level of the left-leaning zebra patterns on the

 

 

screen.

 

 

50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%

ZEBRA DETECT 2

(Camera)

Selects the brightness level of the right-leaning zebra patterns on the

 

 

screen.

 

 

50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%,

 

 

OFF

 

 

<Note>

 

 

The zebra patterns do not appear if you select OFF.

MARKER

(Camera)

Select ON to display the marker. (Page 40)

 

 

ON, OFF

 

 

To display the marker, press the ZEBRA button.

SAFETY ZONE

(Camera)

Sets SAFETY ZONE to ON or OFF.

 

 

OFF, 90%, 4:3, 13:9, 14:9

FOCUS BAR

(Camera)

Turns the FOCUS ASSIST bar display ON or OFF.

 

 

ON, OFF

 

 

When set to ON, the FOCUS ASSIST bar can be displayed.

VIDEO OUT OSD

(Camera)

Select ON to output the information displayed on the screen together

 

(MCR)

with the signals from the VIDEO IN/OUT jack.

 

 

ON, OFF

DATE/TIME

(Camera)

Sets whether to display the date and time on the screen and whether to

 

(MCR)

output from the VIDEO IN/OUT jack.

 

 

OFF:

 

 

The date and time are not displayed.

 

 

TIME:

 

 

The time is displayed.

 

 

DATE:

 

 

The date is displayed.

 

 

TIME&DATE:

 

 

The time and date are displayed.

LEVEL METER

(Camera)

Select ON to display the audio level meter.

 

(MCR)

ON, OFF

ZOOM·FOCUS

(Camera)

Selects the unit of zoom and focus values.

 

 

OFF, NUMBER, mm/feet, mm/m

 

 

<Note>

 

 

Use the mm/feet or mm/m display only as a general guideline since it is

 

 

not entirely accurate.

CARD/BATT

(Camera)

Select ON to display the remaining P2 card recording capacity and

 

(MCR)

remaining battery charge.

 

 

ON, OFF

P2CARD REMAIN

(Camera)

Determines how remaining P2 card capacity is displayed.

 

(MCR)

ONE-CARD: Displays how much space is left on the P2 card that is

 

 

currently being recorded.

 

 

TOTAL: Displays the total amount of space that is left on P2 cards

 

 

inserted in the camera.

108

___indicates the factory setting.

Page 108
Image 108
Panasonic AG-HPX170P operating instructions 108, Display Setup screen