Panasonic AG-HPX170P Uploading the metadata Meta Data, Load, Record, Name, Initialize

Thumbnail operations (continued)
• When deleting items of LOCATION (shooting		3 Push the Operation lever in the E or R
location) in SHOOT, items cannot be deleted
		direction to make a selection and press it
independently. Make ALTITUDE blank, and the
		again.
other items (LONGITUDE/LATITUDE) are also
deleted.			THUMBNAIL	LOAD
• Metadata of a clip with the incomplete clip			OPERATION	RECORD
			PROPERTY	USER CLIP NAME
indicator cannot be edited. To edit metadata of a
			META DATA		INITIALIZE
clip recorded in multiple P2 cards, insert all the					PROPERTY
			EXIT
				EXIT
P2 cards containing video data of the clip before
		LOAD:
starting editing.
• If MEMO contains 100 or more characters, it			Select this to load the metadata recorded on
cannot be edited.			the SD memory card into the unit.
			When the Operation lever is pressed with
			operation moved to LOAD, the metadata
Uploading the metadata (META DATA)
You can perform any of the following operations. If			on the SD memory card will be displayed.
			Therefore, press the Operation lever again.
necessary, make preparations prior to undertaking
			Select YES to load the metadata or NO to
the operations.
			cancel the loading, and press the Operation
Loading the metadata
			lever.
• Insert the SD memory card on which the
			• If characters other than single-byte
metadata is recorded into the unit. (For details on
			alphanumeric characters are used in the
creating the metadata, see page 57.)
			metadata file name to be loaded, they are
Selecting whether to record the metadata on
			displayed as “∗”.
the P2 card
		RECORD:
Changing recording method of USER CLIP
			Select this to set whether to record the
NAME
			metadata to be loaded into the unit
Initializing the metadata inside the unit
			simultaneously on a P2 card.
Confirming and editing camera-recorder
			Select ON to record the metadata or OFF
metadata
			to cancel the recording, and press the
1 On the thumbnail screen, press the MENU			Operation lever. The factory setting for this
			mode is OFF.
		USER CLIP NAME:
button.
			The USER CLIP NAME recording method
A menu now appears. (Page 64)
			is selectable. Please refer to Appendix
2 Push the Operation lever in the E or R
			(Page 124).
direction to select META DATA and press it		INITIALIZE:
(or push it in the Q direction) again.			Select this to initialize the metadata which
			has been recorded in the unit.
	THUMBNAIL
			Select YES to initialize the metadata or NO
	OPERATION
	PROPERTY		to cancel the initialization, and press the
	META DATA		Operation lever. All the settings including the
	EXIT		ON or OFF setting for RECORD are now
			cleared.

72