Panasonic AG-HPX170P Installing and removing the power supply, Removal, Installation

Connect the DC cord to the AC adapter.

Installing and removing the power supply

Installing and removing the battery Installation

1 Insert the battery until it clicks into place.

Removal

1 Set the POWER switch to OFF, and check that the mode lamp is off.

2 While pressing the battery release button, raise up the battery to remove it.

•Support the battery with your hand to ensure that it will not fall.

Mode lamp

Battery release button

Connecting and disconnecting the power cord

Installation

1

2 Plug the AC power supply cord into the power outlet.

3 Slide the DC cord’s battery connector to the direction of the arrow until it clicks into place.

DC cord’s battery connector

Removal

1 Set the POWER switch to OFF, and check that the mode lamp is off.

2 Slide the DC cord’s battery connector to the direction of the arrow while pressing the battery release button.

Battery release button

3 Disconnect the AC power supply cord from the power outlet.

CAUTION:

This apparatus can be operated at a voltage in the range of 110 – 240 V AC.

Voltages other than 120 V are not intended for U.S.A. and Canada.

Operation at a voltage other than 120 V AC may require the use of a different AC plug. Please contact either a local or foreign Panasonic authorized service center for assistance in selecting an alternate AC plug.

16