Saving scene files and other settings on SD memory cards (continued)

6 Press the MENU button four times to cancel the menu mode.

To load a file

1)Perform steps 1 to 3, select READ in step 4 and push the Operation lever .

When reading is completed, READ OK appears.

To title a file

1)Perform steps 1 to 4.

2)Push the Operation lever in the E or R direction to select a character, then push it in the Q direction to move to the next character.

(The next character can now be selected.)

You can input any of the following characters: Space, A to Z, 0 to 9, : ; < = > ? @ [ \ ] ^_-./

You can erase all characters using the RESET button on the camera or the remote control.

BARS

SHUTTER

SPEES SELECT

CH1 SELECT CH2 SELECT

INPUT1

INPUT2

INT(L)

INT(R)

ON

ON

INPUT1

INPUT2

OFF

OFF

INPUT2

 

MIC POWER+48V

 

AUDIO

 

ZEBRAREC OIS

COUNTER

RESET/TC SET

LCD

 

EVF DTL

WFM

DATE/ PHOTO OSD TIME SHOT

COUNTER RESET TITLE

MULTI/

P-IN-P REC A.DUB

/REW PLAY FF/

START/

STOP

ZOOM

- VOL +

Camera or Remote control

3)When all characters have been entered, push the Operation lever in the W direction at the left end (or in Q direction at the right end) of the characters. Then press the Operation lever .

To reload a file from an SD memory card

1)Perform steps 1 and 2.

2)Push the Operation lever in the E or R direction to move to TITLE RELOAD, display YES and press it again.

The file reloads.

If WRITE NG FORMAT ERROR appears, format the SD memory card. (Page 29)

If WRITE NG WRITE PROTECT appears, release the protected status of the SD memory card.

If WRITE NG CANNOT ACCESS appears, quit all other operations (such as playback) before proceeding.

If WRITE NG ERROR appears, the SD memory card may be defective. Replace it.

56

Page 56
Image 56
Panasonic AG-HPX170P Saving scene files and other settings on SD memory cards, To title a file, Perform steps 1 to