Panasonic AG-HPX170P Screen displays, Regular displays, Remote, P2 Full, P2 Lack

Screen displays

Regular displays

For details on the safety zone, refer to 38.

36 35 34 33

1

2

3 4

5

68 7

10911

12

131514

TC 12 : 34 : 56 : 00

106

min

32

1

2

REMOTE

A

I – PAUS

E

USER - 1

31

1394

30

HD1080i

29



D 1 0 X

28

1394 TC



P 3.2 K

27

SQU



1 8 dB

2625

ALC

24

LOW

LIGHT

ND 1/64

83 %

ND 1/64

TEXT MEMO

2223

R

JUN

19

2008

23 : 59 : 59

60 : 24P

1 / 123. 4

SPOT MF23 . 5 ft

21

H 2

F 5 .6

Z10 . 4 O

20

H 1

O

C

C

VOLUME [ _ ]

37

16

17

18 19

[ + ]

1Time code displays

Each time you press the COUNTER button, the display switches over to the following data (or no indication).

COUNTER: (CAM mode only) Counter value

CLIP COUNTER: (CAM mode only) Counter value in memory stop mode

The CLIP COUNTER appears when CLIP is selected under REC COUNTER in the setup menu DISPLAY SETUP screen.

TC:

Time code value. When the time code value could not be read correctly from the P2 card, [TC*] is displayed.

When it acts in drop frame mode, the colon between seconds and frames become “.”.

tc:

Time code value. (During FILM CAM mode, the frame digits are displayed in 24 frames) When the time code value could not be read correctly from the P2 card, [tc*] is displayed. When it acts in drop frame mode, the colon between seconds and frames become “.”.

UB:

User information

When user information could not be read correctly from the P2 card, [UB*] is displayed.

FR:

Frame rate information for recording

FR 60I: 60i interlace mode (60 fields/sec.)

FR 60P: 60P progressive mode (60 frames/sec.)

FR 30P: 30P progressive mode (30 frames/sec.)

FR 24P: 24P progressive mode (24 frames/sec.)

FR 24PA: 24P advanced mode (24 frames/ sec.)

When in FR24P and FR 24PA mode, the sequence information of the frame conversion at the final place.

2 Warnings

REMOTE:

Blinks when the wrong equipment setting is selected on the remote control unit.

P2 :

Blinks when a P2 card has not been inserted, or when the camera is in a write- protected state.

P2 FULL:

Blinks when there is no remaining capacity in the P2 card.

P2 LACK:

Blinks in the loop rec mode when the remaining capacity of the P2 card is insufficient.

:

Lights when the internal battery for the calendar has run out. (Page 59)

(Continued on the next page)

Displays

87