Panasonic AG-HPX170P operating instructions Checking the clip or card information Property

FORMAT:

Select this to format a P2 card or SD memory card.

When you move to FORMAT, the card selection screen will appear. Select the P2 slot (SLOT1 or SLOT2) or select SD CARD, and press the Operation lever. Select YES to format the card or NO to cancel the formatting, and press the Operation lever.

REPAIR CLIP:

Select this to repair defective clips.

Select YES to repair the clip or NO to cancel the repair, and press the Operation lever.

•The SHOT MARK and TEXT MEMO data are deleted when a clip is repaired.

RE-CONNECTION:

Use this function to reconnect clips that span multiple P2 cards.

Clips recorded across multiple P2 cards may become incomplete clips.

Should this happen, use the RE- CONNECTION function to merge the different clips to create one single clip. Select YES/NO and push the Operation lever.

EXCH. THUMBNAIL:

Use this function to replace thumbnail images with images to which text memos have been attached.

Select YES/NO and push the Operation lever.

EXIT:

Select this to return to the last screen.

4 Press the MENU button to release the menu mode.

•When clips have been copied by operating Explorer, for instance, the “  !  ” indicator may appear on the clips. If this happens, “  !  ” can sometimes be released by downloading the latest version of the P2 viewer from the web site given below, installing it in your computer, and copying the clips again.

 https://eww.pavc.panasonic.co.jp/pro-av/

Checking the clip or card information (PROPERTY)

You can perform any of the following operations. If necessary, make preparations prior to undertaking the operations.

Checking and repairing clip information

•Move the yellow frame to the clip to be checked.

Checking the P2 card information

•Insert the P2 card into the unit.

Checking the SD memory card information

•Insert the SD memory card into the unit.

Setting the P2 card memory capacity display Checking the version of this system

1 On the thumbnail screen, press the MENU button.

A menu now appears. (Page 64)

2 Push the Operation lever in the E or R direction to select PROPERTY and press it (or push it in the Q direction) again.

THUMBNAIL	Playback
OPERATION
PROPERTY
META DATA
EXIT

3 Push the Operation lever in the E or R direction to make a selection and press it again.

THUMBNAIL
	CLIP PROPERTY
OPERATION	CARD STATUS
PROPERTY	D	EVICES
META DATA	PROPERTY SETUP
EXIT	SYSTEM INFO
	EXIT

CLIP PROPERTY:

The information of the clip indicated by the yellow frame is displayed. (Page 70)

CARD STATUS:

The P2 card information is displayed. (Page 70)

DEVICES:

The SD memory card information is displayed. (Page 71)

PROPERTY SETUP:

Set the method of displaying the P2 card memory capacity. After selecting the P2 CARD CAP, select REMAIN (remaining memory) or USED (memory used), and press the Operation lever.

(Continued on the next page)

69