Panasonic AG-HPX170P Using the LCD, Emphasizing outlines, CAM mode, press EVF DTL

Using the LCD

1 Set the POWER switch to ON.

2 Hold down the OPEN button to open the LCD monitor.

•It can open out to 120 degrees. Do not try to open it further as this will damage the camera.

OPEN button

3 Position the LCD monitor where it is easiest to see.

•The monitor can be rotated 180 degrees toward the lens and 90 degrees toward you.

•Do not apply unnecessary force to the open LCD. This can damage the camera.

• Ensure the LCD is fully closed.

Emphasizing outlines

Emphasizing the outlines of the images you see in the viewfinder or on the LCD makes it easier to focus.

Emphasizing the outlines does not effect the images you shoot.

1 In CAM mode, press EVF DTL.

“EVF DTL ON” appears on the screen for about 2 seconds.

Preparation

BARS	SHUTTER	SPEES SELECT
CH1 SELECT CH2 SELECT		INPUT1	INPUT2
INT(L)	INT(R)	ON	ON
INPUT1	INPUT2	OFF	OFF
INPUT2		MIC POWER+48V
	AUDIO
		ZEBRAREC OIS
COUNTER	RESET/TC SET
LCD		EVF DTL	WFM

EVF DTL button

Press EVF DTL again to return to the original display. “EVF DTL OFF” appears on the screen for about 2 seconds.

21