Panasonic AG-HPX170P Appendix, 124, Selecting the User Clip Name Recording method, TYPE2

Appendix

Selecting the USER CLIP NAME

recording method

Press the MENU button and select META DATA

PROPERTY  USER CLIP NAMEto select the recording method. Two options are available:

TYPE1and TYPE2. TYPE1

	USER CLIP NAME to
	be recorded
If clip metadata has	Uploaded data
been read in
If no clip metadata
has been read in
or if the setting	Same as GLOBAL
for recording clip	CLIP ID (UMID data)
metadata has been
turned off
TYPE2
	USER CLIP NAME to
	be recorded
If clip metadata has	Uploaded data +
been read in	COUNT value*
If no clip metadata
has been read in
or if the setting	Same as CLIP NAME
for recording clip
metadata has been
turned off

*The COUNT value is indicated as a four-digit number.

The COUNT value is incremented each time a new clip is captured if clip metadata has been read in and TYPE2 has been selected as the recording method.

The COUNT value can be reset using the following procedure.

Press the MENU button and select META DATA

PROPERTY  USER CLIP NAME to display the menu shown below. Select “COUNT RESET” with the cursor and press the Operation lever to reset the COUNT value to 1.

When a P2 card with a memory capacity of 8 GB or more is used in this unit and a one-time continuous recording exceeds the prescribed duration (approx. 5 minutes for DVCPRO HD, approx. 10 minutes for DVCPRO50 or approx.

20 minutes for DVCPRO or DV) or when a one- time recording extends over more than one P2 card, the recording concerned will automatically be undertaken as a separate clip.

At this time, each clip will be provided with its own COUNT value.

Example of recording (DVCPRO50) a clip on one P2 card:

REC start				REC/PAUSE
(recording start)				(recording pause)
		Recording duration = Approx. 15 min.
		Clip 1		Clip 2
	COUNT value = 0001		COUNT value = 0002
		10 min.		5 min.

Example of recording a clip on two P2 cards:

REC start				REC/PAUSE
(recording start)				(recording pause)
		Clip 1		Clip 2
	COUNT value = 0003		COUNT value = 0004
		1st card		2nd card

If the clip thumbnails are displayed as shown in the example above or their properties are indicated using a P2 device, the thumbnail and COUNT value of clip 1 will be displayed.

124